______________________________________________________________________________________
External heater hot tub user and maintenance manual
9
Make sure that the external heater and chimney are not situated near flammable
items/materials.
Safe distances must be consulted on with the local rescue service.
Loosen the hose clamps before connecting the hoses to the heater, and then push the hoses
firmly onto the pipes behind the heater. Liquid soap or another lubricant may be used to
facilitate the process. The overlap must be at least 4 cm.
Make sure that the drain plug is closed before filling the hot tub with water.
Debris may flow from the heater when filling the hot tub with water for the first time.
Follow the assembly order specified in this manual.
The correct assembly order is as follows.
Remove the plastic and cardboard packaging from the different parts.
Install the hot tub on a pre-prepared flat and hard surface.
Install the heater to the same level with the hot tub. See image 5.
Attach the elastic hoses (2 pcs) to the metal pipes on the rear of the external heater.
The overlap must be at least 4 cm.
Tighten the clamps (4 pcs). See images 6 and 7.
Close the drain plugs on the hot tub and heater. See images 4 and 8.
Attach the chimney to the external heater (two parts of the chimney need to be
assembled beforehand). See image 9.
Fill the hot tub with water.
