18
Appendix
Troubleshooting
The power will not turn on.
→ If you connect the taktile/TRITON taktile to your computer via a USB hub, it may not power on
due to insufficient power. In that case, you should directly connect the taktile/TRITON taktile to
the USB connector on your computer without using a USB hub.
→ Possibly there is a problem with the USB cable currently used. Please check if you are able to
turn it on using the supplied USB cable.
There is no response from the software.
→ Please check that the taktile/TRITON taktile is correctly set in the MIDI port setup of your appli-
cation.
→ Your application may not support some functions. To check this, please refer to the instruction
manual of your application.
→ To use the functions of the taktile/TRITON taktile, you need to set up your application. To set it
up, please refer to the Setting Guide in the taktile/TRITON taktile instruction manual and the in-
struction manual of your application.
Sometimes it is not recognized as a USB device.
→ Possibly there is a problem with the USB cable currently used. Please replace the cable and
make a retry.
→ Please check whether there is any problem with the USB A connector on the destination PC or
Mac.
→ It is possible that long USB cables are not recognized. Please use the supplied USB cable. A
long USB cable might be recognized if it is connected via a powered hub. Even in this case,
please connect this device and the powered hub using the supplied USB cable.
Buttons do not function as indicated on the taktile/TRITON taktile.
→ Your application may not support some functions, or the functions may be different.
→ Please check if the Torget DAW in the scene parameters conform to your application.
The velocity of the keyboard or the trigger pad has no effect.
→ Please check the velocity curve setup for the keyboard or the trigger pad.
The arpeggiator will not function.
→ Please check whether the MIDI Clock Source is set up correctly.
→ Please check that the Arpeggiator Enable settings for the keyboard, the touch scale and the
trigger pad are set up correctly.