manualshive.com logo in svg

Korg Soundlink DRS OASYS PCI, Руководство пользователя

Поделиться
Скачать
Korg Soundlink DRS OASYS PCI Скачать руководство пользователя страница 34

Using Modulation

Using the OASYS PCI

30

OASYS PCI

English

Using Modulation

Built-in modulation routings

Fixed Modulation Paths

Many Patches and Effects offer built-in modulation paths for certain parameters. 
Sometimes, these modulation paths will be “hard wired,” meaning that the 
amount of modulation can be altered, but the source of the modulation is 

fi

xed. 

For instance, a 

fi

lter envelope might be hard-wired to control the 

fi

lter cutoff.

Assignable Modulation Paths

Patches and Effects may also offer assignable modulation paths, so that you can 
choose the source of the modulation. Assignable modulation paths include an 
extensive menu of MIDI modulation sources, as detailed under “Modulation 
Sources,” on page 94.

Creating a modulation routing

One of the special features of the OASYS PCI is that 

all

 Control Panel parameters 

are modulatable–even if they don’t have built-in modulation routings.
To create a new modulation routing:

1.

Click on the name of the Control Panel parameter you’d like to modulate. 
For on/off buttons, option-click (MacOS) or CTRL-click (Windows) on the 
name.

The Modulation Palette will appear. Initially, it will contain two empty modulation 
paths, each with a source and an amount.

2.

Select a modulation source from the menu.

For descriptions of the available modulation sources, see “Modulation Sources,” 
on page 94.

3.

Set the modulation amount as desired.

The amount is a percentage of the total range of the parameter. When the Amount 
is set to +100, a MIDI modulation value of 127 will take the parameter all the way 
to the maximum value, even if the Control Panel knob or slider is at its very lowest 
setting.
Conversely, when the Amount is set to -100, a MIDI modulation value of 127 will 
take the parameter all the way to the minimum value, even if the Control Panel 
knob or slider is at its very highest setting. 
After you’ve assigned a modulation routing, the name of the Control Panel 
parameter will be underlined and colored red, to show that it is now being 
modulated. 

Содержание Soundlink DRS OASYS PCI





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды