Control Panel
Reference
94
OASYS PCI
English
When a modulation routing is assigned, the name of the modulated Control Panel
parameter will be underlined and colored red.
For more information, see “Modulation Palette,” on page 97.
Modulation Sources
None.
No modulation will be applied.
Velocity.
MIDI note-on velocity. When modulating Effects, the most recent
velocity will be used.
Exp. Velocity.
MIDI note-on velocity, through an exponential curve. This creates
more variation at high velocities, and less variation at lower velocities. When
modulating Effects, the most recent velocity will be used.
Note.
MIDI note number. When modulating Effects, the most recent note number
will be used.
Note+Pitchbend.
This selection adds the Pitch Bend amount to the MIDI note
number, for more precise pitch-related modulation. When modulating Effects, the
most recent note number will be used.
Exp. Note.
MIDI note number, through an exponential curve. This creates more
variation from note to note at the high end of the keyboard, and less variation at
the low end. At C2, the value is very small; at C7, it is about 90% of maximum.
When modulating Effects, the most recent note number will be used.
Exp. Note+Pitchbend.
This selection adds the Pitch Bend amount to the
exponential MIDI note number, for more precise pitch-related modulation. When
modulating Effects, the most recent note number will be used.
Note Gate.
This is an on/off mod source. When the key is held down, the
modulation is at maximum; when the key is released, the modulation goes to zero.
Note Gate is intended for use in Patches, and does not work for modulation of
Effects parameters.
Note Gate+Sustain.
This adds the Sustain pedal to Note gate. When the key or the
Sustain pedal is held down, the modulation is at maximum; when the key or the
Sustain pedal is released, the modulation goes to zero. Note Gate+Sustain is
intended for use in Patches, and does not work for modulation of Effects
parameters.
Any Note Gate.
This is a version of Note Gate which will work with both Patches
and Effects. As long as any key is held down, the modulation is at maximum;
when all keys are released, the modulation goes to zero.
Any Note Gate+Sustain.
This adds the sustain pedal to Any Note Gate, and will
work with both Patches and Effects. As long as any key or the sustain pedal is held
down, the modulation is at maximum; when all keys are released, and the sustain
pedal is lifted, the modulation goes to zero.
Mod Wheel.
MIDI Modulation Wheel (controller #1).
Aftertouch.
MIDI Aftertouch.
Содержание Soundlink DRS OASYS PCI
