manualshive.com logo in svg

Korg Soundlink DRS OASYS PCI, Руководство пользователя

Поделиться
Скачать
Korg Soundlink DRS OASYS PCI Скачать руководство пользователя страница 12

 

What are...?

Using the OASYS PCI

8

OASYS PCI

 

English

 

What are...?

 

File Types

 

The OASYS PCI use a number of different 

fi

le types to organize and store sounds. 

Each of these types is brie

fl

y described below.

 

Multis

 

A Multi is a single, complete setup for the OASYS PCI. It includes all of the 
settings for the Mixer windows, and for the Programs, Patches, Effects, and 
Multisamples being used. The Multi also includes settings for all Program Edit 
and Multisample Edit windows, and all Control Panel parameters for the Patches 
and Effects.
To put it another way, Multis store all of the settings in the Mixer, Send Busses, 
Output Busses, Channel Parameters, Program Edit, Control Panel, and 
Multisample Edit windows-everything except for the Preferences and ASIO 
Control Panel windows. 
For more information, please see “Using Multis” on page 13.

 

Programs

 

Programs are the basic sounds of the OASYS PCI, and must be placed on a Mixer 
Channel to be played. They play one or two Patches, which can be layered or split 
by key and velocity ranges. They also have up to four Insert Effects, which appear 
in the Mixer Channel. Programs store all Control Panel settings for their Patches 
and Effects.
For more information, please see “Using Programs & Patches” on page 19.

 

Effects-Only Programs

 

Effects-Only Programs store all of the Insert Effects for a Mixer Channel, including 
all Effects Control Panel parameters. You can use them to load chains of Effects 
into a Mixer Channel, or to store such chains for use elsewhere.
Effects-Only Programs are just normal Programs without any Patches loaded into 
the Patch slots. Unlike normal Programs, Effects-Only Programs can be used on 
any type of input, including Audio Inputs, Streams, or even other Programs.
In the Korg factory voicing, they will be placed in the Programs section of the 
folder named “Korg FX Programs.”
For more information, please see “Using Effects” on page 23.

 

Patches

 

Patches are the basic units of sound creation on the OASYS PCI. They must be 
placed in a Program in order to be played. Each Patch contains its own synthesis 
algorithm, which may be quite different from one Patch to another. The Patch 

Содержание Soundlink DRS OASYS PCI





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды