manualshive.com logo in svg

Korg Soundlink DRS OASYS PCI, Руководство пользователя

Поделиться
Скачать
Korg Soundlink DRS OASYS PCI Скачать руководство пользователя страница 23

Using the OASYS PCI

Using Programs & Patches

OASYS PCI

19

Using Programs & Patches

Creating a new Program

To create a new program:

1.

In the desired Mixer Channel, set the Input Type to Program.

A new Program, named Untitled, will appear in the Input Slot. All of its parameters 
will be set to default values, and both Patch slots will be empty. 

Editing a Program

To edit a Program:

1.

Double-click on the Program name, in either the Mixer Channel input slot 
or the Channel Parameters window.

This opens the Program Edit window, as described on page 86. 
In the Program Edit window, you can select one or two Patches for the Program, 
along with their key and velocity ranges, relative volume levels, scale, voice 
assignment modes, and so on.
Synthesis parameters, such as envelopes, lfos, modulation routings, and so on, are 
edited in the Patch Control Panel, as explained under “Editing a Patch,” below. 

Adding a Patch to a Program

To add a Patch to a Program:

1.

Open the Catalog, by selecting it from the Windows menu.

2.

In the Catalog, select the Patch tab.

3.

Drag a Patch from the Catalog onto a Patch slot in the Program Edit window.

(MacOs only: Alternatively, you can select the Patch slot and then double-click the 
name of the Patch in the Catalog.)
The Patch will appear in the slot. 

Editing a Program Name

You can edit the name of a Program from within a Multi, without needing to save 
the Program to the disk. To edit a Program name:

1.

Double-click on the Program name in the Mixer or Channel Parameters 
window.

The Program Edit window will appear.

2.

Click in the Program Name parameter, and edit as desired.

The new name will take affect immediately.

Содержание Soundlink DRS OASYS PCI





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды