4
Tuning procedure
1. Press the TUNER ON/OFF switch to activate the tuner.
The center of the LED meter will light.
The signal from the INPUT jack will not be output from the BYPASS jack.
Tip:
The TUNER ON/OFF switch only functions if an instrument is connected
to the INPUT jack.
2. If necessary, set the reference pitch and the display mode. (page 5
“Reference pitch settings”, page 6 “Display mode settings”)
3. Play a single note on your instrument and tune it so that the desired note
appears in the note name display.
The note name closest to the entered note appears in the note name display.
4. Tune your instrument using the tuning LED meter.
The method for indicating whether your instrument is in tune, sharp or flat
depends on which display mode you choose (page 6 “Display mode
5. After you finish tuning your instrument, press the TUNER ON/OFF switch to
turn the tuner off.
The tuning LED meter turns off. The signal from the INPUT jack will be output
from the BYPASS jack (ultra-buffer bypass).
Tip
: The reference pitch, display mode and bright mode settings will be
preserved even if you remove the AC adapter.
Tip
: To reset the settings to the factory defaults (reference pitch = 440 Hz,
display mode = regular, bright mode = brighter), hold down the CALIB
button and press the TUNER ON/OFF switch when you turn on the
tuner.
