- 10 -
Preparations
Connecting the included AC adapter
Fully insert the power cord for the AC adapter into the AC adapter, and then insert the DC
plug into DC 12V jack on the rear panel.
When fastening the cord to
the cord hook, be careful not
to bend this area more than
necessary.
DC12V jack Cord hook
Connect the plug
to an AC outlet.
AC adapter (included)
Power cord
for AC adapter
(included)
Make sure to secure the AC adapter cord to the cord hook on the bottom panel, to make
it harder for the DC plug to accidentally disconnect.
Use only the included AC adapter. Using a different AC adapter may cause a mal-
function.
Connecting audio devices
Turn off your devices before making connections. If you leave the power on when mak-
ing connections, your devices or speakers might be damaged.
Connecting to a powered monitor speaker or mixer
Connect the input jacks of your powered monitor speaker or mixer to the MASTER OUT L/
MONO, R jacks of this module.
To output the sound for each pad separately or to add an external effect, connect using the
DIRECT OUT 1–8 jacks.
If you want to monitor the sound through headphones, connect your headphones to the
(Headphones) jack on this module. Use the HEADPHONES OUT knob to adjust the head-
phone volume.
Note:
The volume may seem a little low if you are listening with headphones of 80Ω im
-
pedance or more.
Connecting an audio player to the AUX IN jack
Use the AUX IN jack to connect an external audio output device such as an audio player.
When connecting a mic to this module, connect the mic amp and mixer first.
Use the INPUT knob to adjust the input level.
