Korg Pa588 Скачать руководство пользователя

Страница: 46 / 252

Playing Sounds

Changing the split point

Play the keyboard.

Changing the split point

If you are not comfortable with the selected split point, you may set the split point to any key.

Note:

As an alterna-

tive, you can press the
Split button in the dis-
play, and follow the
instructions given in the
main text.

Keep the SPLIT button pressed, up until the “Press a key to set the Split
Point” message appears in the display.

Play a note on the keyboard to set the new Split Point.

The message will automatically disappear, and the Split Point is automatically turned on. The
LED on the SPLIT button turns on.

Raising or lowering the Upper octave

If all Upper tracks sound too high or too low, you can quickly change which octave they are playing in.

Use the UPPER OCTAVE buttons on the control panel, to transpose all
Upper tracks at the same time.

Note:

The Octave

Transpose value for each
of the keyboard track is
shown under the
Sound’s name.

Press both UPPER OCTAVE buttons together to reset the octave.

Note how the keyboard once again plays the Upper tracks for
the entire length of the keyboard.

Upper

Each press of this button will lower

the pitch by one octave.

Each press of this button will raise
the pitch by one octave.

Pa588-100UM-ENG.book Page 42 Monday, May 26, 2008 4:34 PM

Содержание Pa588





























































































































































































































































Результаты поиска

Содержание Pa588

Отзывы:

Похожие инструкции для Pa588

Бренды по названию

Популярные бренды

Korg Pa588, Руководство пользователя

Результаты поиска

Содержание Pa588

Отзывы:

Похожие инструкции для Pa588

Бренды по названию

Популярные бренды