manualshive.com logo in svg

Korg PA1X, Руководство пользователя

Поделиться
Скачать
Korg PA1X Скачать руководство пользователя страница 154

150

Song Play operating mode

Effects: FX A…D

Effects in Song Play mode

Pa1X is equipped with four effect processors, or DSPs (Digital
Signal Processors), to process MIDI tracks. In Song Play mode
you can have two or four effects at the same time, depending on
the midifile you are reading.

Effects A and B are usually reserved to both sequencers, while
effects C and D are usually reserved to Keyboard tracks and
Pads. 

Depending on the status of the “Seq.2 FX Mode” parameter,
each effect pair could be reserved to a different Sequencer (see
page 154).

You can also create Songs that make use all four effects in
Sequencer mode.

•

A Song created on the Pa1X (in Sequencer mode) can use
up to 4 effects (usually 2 r 2 modulating effects);
each track may use the A/B or C/D pair.

•

A Standard MIDI File or Karaoke™ file will only use 2
effects (usually 1 1 modulating effect). This lets
you use the remaining 2 effects for the Realtime tracks.

•

When using both sequencers at the same time, and the
“Seq.2 FX Mode” is set to “AB” mode (see page 154), they
only use the A/B pair, while the C/D pair is reserved to the
Keyboard tracks.

•

When using both sequencers at the same time, and the
“Seq.2 FX Mode” is set to “CD” mode (see page 154),
Sequencer 1 uses the A/B pair, while Sequencer 2 uses the
C/D pair, sharing it with Keyboard tracks.

Effects: FX A…D

These pages contain the editing parameters for the four effect
processors. Here is an example of the FX A page, with the Reverb
Smooth Hall effect assigned.

Selected effect

 

 

Select one of the available effects from this pop-up menu. This is
the same as the “FX A…D” parameters found in the “Effects: FX
Select” page (see above).

FX parameters

 

 

Parameters may differ, depending on the selected effect. See
“Effects” on page 329 for a list of available parameters for each
effect type.

Wet/Dry

  

Mix between the effected (Wet) and direct (uneffected, Dry) sig-
nal. This is the same as the “Wet/Dry” parameters found in the
“Effects: FX Select” page (see above).

Src (Source)

 

 

Modulation source. To select the track generating this message,
see the “Mod.Track (Modulating Track)” parameters found in
the “Effects: FX Select” page (see above). For a list of modulation
source, see the “Effects” chapter.

Track Controls: Mode

These parameters let you set the Internal/External, and the Poly/
Mono status of Song tracks. See “Track Controls: Mode” on
page 88.

Parameters

  

Note: 

These parameters can be saved to the Global-Song Play

Setup, by selecting the Write Global-Song Play Setup command
from the page menu.

Track Controls: Drum Volume

These parameters let you adjust the volume for each percussive
instrument family. See “Track Controls: Drum Volume” on
page 150.

Parameters

  

Note:

 Song track values edited in this page are not saved, and are

only intended for realtime use.

Track Controls: Easy Edit

These parameters let you “fine-tune” edit parameters for Sounds
assigned to the tracks. See “Track Controls: Easy Edit” on
page 90.

Parameters

  

Note:

 Song track values edited in this page are not saved, and are

only intended for realtime use.

Keyboard/Ensemble: Keyboard Control

These parameters let you set parameters for the Keyboard tracks.
See “Keyboard/Ensemble: Keyboard Control” on page 91.

Parameters

  

Selected effect

FX param-
eters

SB

Sng

SB

Sng

SB

Sng

SB

Sng

SB

Sng

SB

SB

SB

Содержание PA1X









































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды