manualshive.com logo in svg

Korg NAUTILUS Series, Руководство по параметрам, Страница: 447 / 961

Поделиться
Скачать
Korg NAUTILUS Series Скачать руководство пользователя страница 447

COMBINATION: Page Menu Commands    Copy X-Y Envelope

437

Copy X-Y Envelope

Copy X-Y Envelope 

is available on the X-Y Envelope tab 

of the EQ/X-Y/Controllers page.

This command copies the X-Y envelope from a specified 
program, combination/timbre, or song. For more 
information, see “Copy X-Y Envelope” on page 119.

Detune BPM Adjust

Detune BPM Adjust

 is available on the Pitch tab of the 

Timbre Parameters page.

This command changes a loop’s tempo by changing the 
Timbre’s 

Detune

 parameter. The sample data itself is not 

altered. Since this alters the pitch of the loop along with the 
tempo, it’s generally suited only to un-pitched percussive 
loops.

Note: 

Using 

Detune BPM Adjust

 will over-write any 

previous 

Detune

 settings.

1. Go to the Pitch tab of the Timbre Parameters page.
2. Select the Detune parameter for the desired Timbre.
Detune BPM Adjust

 is available only when the 

Detune 

parameter has been selected. Otherwise, the menu selection 
will be grayed out.

3. Select “Detune BPM Adjust” to open the dialog box.

4. In From, specify the loop’s original BPM value.

Ignore any previous changes from using Detune BPM adjust.

5. In To, specify the desired BPM value. 

The appropriate 

Detune

 value will be calculated 

automatically from these two values.

For example, if you set “From” to 60 bpm and “To” to 120 
bpm, 

Detune

 will be set to +1200 (one octave up).

6. To execute the Detune BPM Adjust command, press 

the OK button. To exit without changing the Detune 
value, press the Cancel button.

Note: 

Since this command does not affect the sample data 

itself, and always over-writes the previous 

Detune

 amount, 

using it repeatedly has no cumulative effect. 

Copy External Scene

Please see “Copy External Scene” on page 121.

Copy Scene

Please see “Copy Scene” on page 121.

Swap Scene

Please see “Swap Scene” on page 122.

Copy Insert Effect

This command copies effects settings from Program, 
Combination, Song, or SAMPLING modes. For more 
information, please see “Copy Insert Effect” on page 122.

Note: 

The slot’s MIDI control channel, as specified by the 

Ch

 parameter on the IFX1–12 pages, will not be copied.

Swap Insert Effect

This command swaps (exchanges) insert effect settings. For 
more information, please see “Swap Insert Effect” on 
page 122.

Note: 

The slot’s MIDI control channel, as specified by the 

Ch

 parameter on the IFX– IFX1-12 pages, will not be 

swapped.

Insert IFX Slot

For more information, please see “Insert IFX Slot” on 
page 122.

Cut IFX Slot

For more information, please see “Cut IFX Slot” on 
page 123.

Clean Up IFX Routings

For more information, please see “Clean Up IFX Routings” 
on page 124.

Drum Kit IFX Patch

This patches the 

Bus Select

 settings for each key of a drum 

kit, temporarily changing the insert effect connection 
destinations. You can execute this only if the timbre’s 
program is a drum program, “DKit” is checked, and the 

Bus 

Select (

GLOBAL 5–3b) setting of the keys in the drum kit is 

set to either IFX1–12.

1. In the Routing1 page or Routing2 page, select the 

timbre for which you want to make settings. (Select a 
timbre parameter or Timbre Number.)

2. Select Drum Kit IFX Patch to open the dialog box.

Содержание NAUTILUS Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов