manualshive.com logo in svg

Korg M50-73, Руководство по параметрам

Поделиться
Скачать
Korg M50-73 Скачать руководство пользователя страница 185

SEQ P8–1: IFX 8–1–4: IFX1

177

8–1–4: IFX1

Here, you can edit the parameters of the insert effect 1 you 
selected in the P8–1: IFX– Insert FX Setup page.

8–1–4a: Insert Effect 1 (IFX1)

IFX On/Off

[Off, On]

Turns the insert effect on/off. This is linked with the On/Off 
setting in the P8–1: IFX– Insert FX Setup page.

Ch (Control Channel)

[Ch01...16, All-R]

This specifies the MIDI channel that will control dynamic 
modulation (Dmod) for the insert effect.

Ch01...Ch16:

 The insert effect will be controlled on the 

specified MIDI channel.

All-R:

 The channel of any track routed through this effect 

can be used to control the effect. (Channels of each routed 
track will be indicated by “*”.)

Drum Kits and the MIDI Control Channel

If a Track is using a Drum Kit, and the Track’s 

Bus (IFX/

Output) Select 

(Seq 8–1–1(2)d) is 

DKit

, this affects the MIDI 

Control Channel as well. In this case, the Track’s MIDI 
channel will be used to control any effect whose 

Ch

 is set to 

All-R, regardless of the 

Bus (IFX/Output) Select

 (Global 5–

4b) settings or the settings of the 

DrumKit IFX Patch

 menu 

command.

P (Effect Preset)

[P00, P01...15, U00...15, ---------------]

Effect Presets let you easily store and recall all of the settings 
for an individual effect. You can store up to 16 user presets 
for each effect type, in addition to 15 re-writable factory 
presets.

The same presets appear in all of the modes (Program, 
Combination, Sequencer, and Sampling).

Note that edits to effects parameters are automatically 
stored with the Song–you don’t need to store them as an 
Effect Preset. Presets just make it easier to re-use your 
favorite settings. 

For instance, you can save an Effect Preset while working on 
a particular Song, and then later use the same Effect Preset 
in a different Program, Combination, or Song.

P00: Initial Set:

 These are the default settings that are 

recalled when you select an effect type in the Insert FX Setup 
page. You can’t save your own settings here.

P01…P15:

 These contain preset data that Korg plans to 

provide in the future. We recommend that you store your 
settings in U00–U15.

U00…U15:

 These are areas in which you can store your own 

settings.

---------------:

 This shows that no Effect Preset has been 

selected. You’ll see this if you’ve just selected an effect or 
selected a new Song. Selecting this setting from the menu 
will not have any effect.

Note: 

Songs save the effects parameter settings, but they 

don’t save the number of the selected Effect Preset. If you 
select an Effect Preset, save the Song to media, and then re-
load the Song, the Effect Preset setting will revert to “

---------

-----.”

For more details, please see “Using Effect Presets” on 
page 67.

IFX1 Parameters:

IFX Parameters

Here, you can set the effect parameters of the insert effect 
you chose in the P8–1–3: Insert FX Setup page.

For more details, please see “Insert Effects (IFX1–IFX5)” on 
page 276.

▼

8–1–4

: 

Menu Command

• 0: 

Memory Status

☞

p.191

• 1: 

Exclusive Solo

☞

p.73

• 2: 

Copy Insert Effect

☞

p.76

• 3: 

Swap Insert Effect

☞

p.76

• 4: 

DrumKit IFX Patch

☞

p.123

• 5: 

FF/REW Speed

☞

p.192

• 6: 

Set Location (Set Location for Locate Key)

☞

p.192

• 7: 

Put Effect Setting to Track

☞

p.204

For more information, please see “Sequencer: Menu 
Command” on page 191.

8–1–5: IFX2, 
8–1–6: IFX3, 
8–1–7: IFX4, 
8–1–8: IFX5

Here, you can edit the effect parameters for insert effects 2–5 
selected in the Insert FX Setup page.

For more information, please see “8–1–4: IFX1,” above.

8–1

–4a

8–1

–4

Menu

Содержание M50-73




































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды