manualshive.com logo in svg

Korg M3, Руководство по параметрам

На нашем сайте вы можете бесплатно скачать руководство по сборке Keiser M3. Это незаменимый документ для правильной сборки вашего велосипеда и настройки его на максимальный комфорт и эффективность. Скачайте его сейчас с manualshive.com.

Поделиться
Скачать
background image

Global P0: Basic Setup 0–1: Basic

357

Aftertouch Curve

[1…8]

This specifies the way in which the volume and/or tone will 
change in response to variations in pressure (aftertouch) 
applied to the keyboard while playing a note.

The curves you can select will depend on the Convert 
Position

 (Global 1–1a) setting. If the setting is PreMIDI, the 

curve is applied immediately after the keyboard. If the 
setting is PostMIDI, the curve is applied immediately before 
the sound generator.

If the setting is PreMIDI, the aftertouch effect produced 
when you press down on the keyboard will be modified at 
the source according to transmission curves 1–8, and 
reception is fixed at curve 3 linear.

If the setting is PostMIDI, the aftertouch effect produced 
when you press down on the keyboard or when receiving 
aftertouch data is transmitted according to curve 3, and 
modified by curve 1–8 at the destination.

1, 2: 

This curve produces change when strong aftertouch 

pressure is applied.

3 (Normal):

 The normal curve.

4, 5:

 This curve produces change even when light pressure is 

applied.

6, 7:

 These curves produce change in 24 or 12 steps. 

respectively, and are appropriate for when you are recording 
aftertouch data on the sequencer and wish to conserve 
memory. (Set the Convert Position to PreMIDI.) Curve 
number 7 allows change over twelve steps, so when using 
aftertouch to modify the pitch, you can set the range of 
modification to one octave, and use aftertouch to vary the 
pitch in semitone steps.

8:

 This is a random curve. Use this when you wish to create 

special effects, or to use aftertouch to apply unpredictable 
modulation.

When Convert Position (Global 1–1a) is PreMIDI, the 
setting you make here will be applied immediately 
after the keyboard, meaning that it will affect the data 
transmitted via MIDI, but will not affect the received 
data.

With a setting of PostMIDI, the setting you make here 
will be applied immediately before the M3’s internal 
tone generator, meaning that it will affect the data 
received via MIDI, but will not affect the transmitted 
data.

When you use the M3’s keyboard to play the internal 
sounds, the Convert Position setting has no effect.

Note: You can use After Touch Calibration (see page 383) to 
adjust the overall responsiveness of aftertouch.

0–1b: Effect Global SW

IFX 1–5 Off

[Off, On]

On (checked):

 All insert effects IFX1–5 will be off.

Off (unchecked):

 The P8: Insert Effect settings for each IFX 

On/Off

 in Program, Combination, Sequencer, and Sampling 

modes will be valid.

MFX1&2 Off

[Off, On]

On (checked):

 Master Effect1 and 2 (MFX1, 2) will be off.

Off (unchecked):

 The P9: MFX/TFX setting MFX1 On/Off, 

and MFX2 On/Off, in Program, Combination, Sequencer, 
and Sampling modes will be valid.

TFX Off

[Off, On]

On (checked):

 Total effect (TFX) will be off.

Off (unchecked):

 The P9: MFX/TFX setting TFX On/Off, in 

Program, Combination, Sequencer, and Sampling modes 
will be valid.

When IFX1–5 On/Off, MFX1&2 On/Off, or TFX On/
Off

 settings are switched, control change messages 

CC#92 (effect control 2), CC#94 (effect control 4), and 
CC#95 (effect control 5) will be transmitted respectively. 
The transmitted data will be 0 for off, and 127 for on.

0–1c: KARMA/Drum Track

All KARMA/DT Off

[Off, On]

On (checked):

 All KARMA functionality and the Drum 

Track function will be off. The KARMA function will not 
operate even if the KARMA ON/OFF switch is on. The 
Drum Track function will not operate even if the DRUM 
TRACK ON/OFF switch is on.

Off (unchecked):

 The KARMA settings and KARMA ON/

OFF switch settings in Program, Combination, and 
Sequencer modes will be used. The Drum Track function 
will operate according to the settings in each mode and the 
state of the DRUM TRACK ON/OFF switch. 

Load KARMA when changing:

Program

[Off, On]

On (checked):

 When you switch programs, the KARMA 

Module settings stored in that program will be used. 
Normally you will use the On setting.

Off (unchecked):

 The KARMA Module settings will not 

change even if you switch programs. Use this setting if you 
want to switch Program sounds without changing the 
phrases from the KARMA Module.

Combination

[Off, On]

On (checked):

 When you switch combinations, the KARMA 

Module settings stored in that combination will be used. 
Normally you will use the On setting.

Off (unchecked):

 The KARMA Module settings will not 

change even if you switch combination. Use this setting if 
you want only to switch combination sounds without 
changing the phrases from the KARMA Module.

▼

0–1: Menu Command

• 0: Write Global Setting

☞

p.382

• 1: Load Preload/Demo Data

☞

p.382

• 2: Set Prog User-Bank Type

☞

p.382

• 3: Change all bank references

☞

p.383

• 4: Touch Panel Calibration

☞

p.383

Received Table

Curve 3

Curve 1–8

Transmitted Table

Curve 1–8

PreMIDI

Global Convert Position

KBD

MIDI

Curve 3

TG

PostMIDI

For a setting of PreMIDI

After Touch (KBD

→

MIDI Out)

Soft

127

Strong

The aftertouch curves for the transmitting side and receiving side are shared.

1

For a setting of PostMIDI

After Touch (MIDI In

→

TG)

0

MAX

127

Aftertouch
effect

3

4

5

7

2

6

8:RANDOM

1

3

4

5

7

2

6

8:RANDOM

Содержание M3








































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для M3

EAW MX250 Owner'S Manual preview
MX250
Бренд: EAW Страницы: 10
NEC N8104-128 Installation Manual preview
N8104-128
Бренд: NEC Страницы: 47
Zhone 6211 Quick Installation Instructions preview
6211
Бренд: Zhone Страницы: 1
Dialogic EDP-10 Quick Install Manual preview
EDP-10
Бренд: Dialogic Страницы: 2
Ubiquiti PowerBeam AC Gen2 Quick Start Manual preview
PowerBeam AC Gen2
Бренд: Ubiquiti Страницы: 22
Nvidia DGX A100 User Manual preview
DGX A100
Бренд: Nvidia Страницы: 115
Novus NVIP- NVRA0104/GO User Manual preview
NVIP- NVRA0104/GO
Бренд: Novus Страницы: 44
Rabbit RabbitCore RCM4400W Product Manual preview
RabbitCore RCM4400W
Бренд: Rabbit Страницы: 126
SriHome NVS001B Quick Operation Manual preview
NVS001B
Бренд: SriHome Страницы: 12
3Com FEM656C Quick Start Manual preview
FEM656C
Бренд: 3Com Страницы: 53
Riverbed SteelCentral NetExpress 470 Upgrade And Maintenance Manual preview
SteelCentral NetExpress 470
Бренд: Riverbed Страницы: 140
Alphacool NexXxoS GPX-N 1070-M08 Instruction Manual preview
NexXxoS GPX-N 1070-M08
Бренд: Alphacool Страницы: 4
ADLINK Technology AMSTX-CF Series User Manual preview
AMSTX-CF Series
Бренд: ADLINK Technology Страницы: 73
ST L6470H Manual preview
L6470H
Бренд: ST Страницы: 64
DMX4ALL DMX-Relais 2 INRUSH User Manual preview
DMX-Relais 2 INRUSH
Бренд: DMX4ALL Страницы: 18
Idex KNIGHT MT-300 Instruction Manual preview
KNIGHT MT-300
Бренд: Idex Страницы: 4
Cambium Networks PMP 430 Series User Manual preview
PMP 430 Series
Бренд: Cambium Networks Страницы: 132
Velleman K8048 Manual preview
K8048
Бренд: Velleman Страницы: 14

Бренды по названию

Популярные бренды

Загрузить еще бренды