manualshive.com logo in svg

Korg M3, Руководство по параметрам

На нашем сайте вы можете бесплатно скачать руководство по сборке Keiser M3. Это незаменимый документ для правильной сборки вашего велосипеда и настройки его на максимальный комфорт и эффективность. Скачайте его сейчас с manualshive.com.

Поделиться
Скачать
background image

PROG P7–2: KARMA 2 7–2–3: Dynamic MIDI

95

7–2–3: Dynamic MIDI

Dynamic MIDI

 lets you use this instrument’s controllers 

and MIDI control messages to control specific KARMA 
functions.

You can take advantage of this to control KARMA in various 
ways while you play. For example, you can use note-ons to 
advance the KARMA clock (Manual Advance), or a KYBD-
61/73/88’s joystick to Trigger the start of the patterns. You 
can use a foot pedal to control Auto Transpose, or a damper 
pedal to control the KARMA Latch settings.

7–2–3a: Tempo

 (Tempo)

[040.00...300.00, EXT]

For more information, please see “

 (Tempo)” on page 3.

7–2–3b: Dynamic MIDI

Dynamic MIDI Select

[1–2, 3–4, 5–6, 7–8]

This selects the Dynamic MIDI parameters you’ll edit.

Input (Dynamic MIDI Input Module)

In Program mode this is fixed at A. 

This is because only KARMA Module A is used. This setting 
cannot be changed.

Source (Dynamic MIDI Source)

[Off, JS+Y (CC#01)...Velocity Outside Zone]

Indicates the controller or action. that will be the Dynamic 
MIDI source.

For more information, please see “Dynamic MIDI Sources & 
Destinations” on page 601.

Action (Dynamic MIDI Range Action)

[Momentary, Toggle, Continuous]

Specifies the operation mode for Dynamic MIDI.

Momentary: 

The parameter will be controlled as a 

momentary switch. For example if Source is JS+Y (CC#01), 
the parameter will normally be off, and will be on when you 
move the joystick.

Note: If Polarity is + and the source controller value is less 
than or equal to the Bottom setting, the destination will be 
off. If the controller value is greater than or equal to the Top 
setting, it will be on.

Example

When Bottom: 000 and Top: 127

The controller value and the on/off status are related as 
follows.

000 

→

 127: on at 127

127 

→

 000: off at 000

Toggle: 

The parameter will be controlled as a toggle switch. 

For example if Source is JS+Y #01, the on/off state will 
alternate each time you tilt the joystick.

Note: If Polarity is +, on and off will alternate each time the 
source controller value exceeds the Top value after having 
passed through the Bottom value.

Example

When Bottom: 0 and Top: 127

The controller value and the on/off status are related as 
follows.

000 

→

 127: on 

→

 off at 127

127 

→

 000 

→

 127: off 

→

 on at 127

(127 

→

 001 

→

 127: no change)

Continuous: 

The parameter will be controlled continuously, 

over the range specified by Bottom and Top. For example, if 
bottom is 25 and Top is 100, the destination value will be 
smoothly operated when the controller’s value moves 
between 25 and 100. Values outside that range will cause no 
further change.

The operating modes that can be selected are limited by 
the Destination. For more information, please see 
“Dynamic MIDI Sources & Destinations” on page 601.

Destination (Dynamic MIDI Destination)

[Off, RT Params Control...Buffer Latch]

Selects the Dynamic MIDI Control destination function.

For more information, please see “Dynamic MIDI 
Destinations” on page 603.

Bottom (Dynamic MIDI Range Bottom)[000...127]

Specifies the lower limit for the value controlled by Source.

If Source is Short Note, Note No., White Note, or Black 
Note

, the numeric value corresponds to the note numbers C-

1–G9.

Top (Dynamic MIDI Range Top)

[000...127]

Specifies the upper limit for the value controlled by Source.

If Source is Short Note, Note No., White Note, or Black 
Note

, the numeric value corresponds to the note numbers C-

1–G9.

Polarity (Dynamic MIDI Polarity)

[+, –, +/–, –/+]

Specifies the Dynamic MIDI polarity.

For example if you set Polarity to + and the Source is 
KARMA SLIDER 1

, moving the Slider 1 from min to max 

will change the value from 0 

→

 127

. If you set Polarity to –, 

the same Slider 1 movement will change the value from 127 

→

 0

.

For more information, please see “Dynamic MIDI Sources & 
Destinations” on page 601.

▼

7–2–3: Menu Command

• 0: Write Program

☞

p.106

• 1: Panel–SW Solo Mode On

☞

p.106

• 2: Exclusive Solo

☞

p.107

• 3: Copy KARMA Module

☞

p.114

• 4: Initialize KARMA Module

☞

p.115

• 5: Copy Scene

☞

p.115

• 6: Swap Scene

☞

p.115

• 7: Capture Random Seed

☞

p.116

For more information, please see “Program: Menu 
Command” on page 106.

7–2

–3a

7–2

–3b

7–2

–3

Menu

Содержание M3








































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для M3

GE MDS 4710M Setup Manual preview
MDS 4710M
Бренд: GE Страницы: 6
Campbell NL115 Instruction Manual preview
NL115
Бренд: Campbell Страницы: 42
ICP DAS USA I-7532M-FD User Manual preview
I-7532M-FD
Бренд: ICP DAS USA Страницы: 48
ICP DAS USA WF-2572 User Manual preview
WF-2572
Бренд: ICP DAS USA Страницы: 24
Analog Devices Linear SCP-LT8362-S-EVALZ Demo Manual preview
Linear SCP-LT8362-S-EVALZ
Бренд: Analog Devices Страницы: 8
MiLAN E-MCC-1600 Install Manual preview
E-MCC-1600
Бренд: MiLAN Страницы: 1
Symantec PacketShaper PS-S200 Quick Start Manual preview
PacketShaper PS-S200
Бренд: Symantec Страницы: 2
Usr USR4504 Installation Manual preview
USR4504
Бренд: Usr Страницы: 2
peplink balance ONE Manual preview
balance ONE
Бренд: peplink Страницы: 2
A4Tech RG-71M User Manual preview
RG-71M
Бренд: A4Tech Страницы: 7
National Instruments SCXI-1120 User Manual preview
SCXI-1120
Бренд: National Instruments Страницы: 130
DigiTech RPX400 Troubleshooting Manual preview
RPX400
Бренд: DigiTech Страницы: 6
Bose PowerMatch ESPLink Quick Start Manual preview
PowerMatch ESPLink
Бренд: Bose Страницы: 2
ZiLOG Z8018 Series User Manual preview
Z8018 Series
Бренд: ZiLOG Страницы: 317
IFM QHA200 Instructions For Setup preview
QHA200
Бренд: IFM Страницы: 12
Dantel 44118 Installation & Operation Manual preview
44118
Бренд: Dantel Страницы: 22
Renesas H8SX1664 User Manual preview
H8SX1664
Бренд: Renesas Страницы: 21
Intel Core 2 Duo E4300 Design Manual preview
Core 2 Duo E4300
Бренд: Intel Страницы: 55

Бренды по названию

Популярные бренды

Загрузить еще бренды