Korg KRONOS 61, Руководство по обслуживанию, Страница: 42 / 74

(1)
(2)
(3)
(4)
(5
(6)
(7)
Touch cross point of or internal of for the calibration.
b3. Fix it pushing [HELP] switch when the calibration ends.
14-6 Touch function check
Note) Do the check since version 1.5.1 according to the description of b).
a) A blue square is displayed in the center and lower right on the left of LCD.
Confirm the change into green pushing each square by the finger.
Push [ENTER] and advance it to the following inspection if the confirmation of three places
ends.
b) It is displayed in LCD as shown in the following photograph.
b1. Touch cross point of or internal of
white in the blue squre(1)
A blue square discolors if touching within
the range of white .
Whenever touching, the square becomes
blue from green from blue to green.
The point that touches is shown by red .
See the zoom at the position of (2)
Confirm touch has been detected inside of white .
(note) When it is not detected in touch to a white range
Do the calibration again pushing [REW] switch.
Return it to green after the confirmation ends.
b2. Confirm it similarly by and are displayed on the blue square (3)
(note) The zoom of (3) is (4)
b3. Confirm the color changes into green touching in order of (5), (6), and (7).
(note) The check on the detection position is unnecessary.
Confirm square (1)-(7) are all greens.