Korg Electronic Keyboard, Руководство по параметрам

Страница: 485 / 1127

Sequencer P2: Track Parameters 2-6: EXi Audio Input
475
2-6: EX i Audio Input
These parameters let you route audio into EX i
instruments which support audio input, such as the
STR-1. You can use this to create feedback loops, or to
process live or recorded audio through the EX
i ’s
synthesis engine.
EX i which do not support audio input will ignore these
settings.
For more information on using audio inputs with the
STR-1, see “4-8c: Feedback” on page 257.
2–6a: EX i 1
Input Source [PRG, Off, Audio Input 1/2...3/4,
S/P DIF Input L/R, L/R Output,
Indiv. Output 1/2...7/8, REC 1/2, 3/4,
FX Control 1, 2, IFX 1...12, MFX 1, 2, TFX 1, 2]
This selects the input source for EX i 1. You can use this
to create a feedback loop, if desired.
PRG
uses the setting stored in the Program. You may
find this convenient if you use Program Change
messages to switch between two EX
i Programs, and
wish to have the input enabled for one, but disabled
for the other. For more information, see “4–2: EXi
Audio Input” on page 162.
Off
disables the input.
Audio Input 1/2…3/4
and
S/P DIF Input L/R
use the
live audio from the selected input.
L/R Output
and
Indiv. Output 1/2…7/8
use the audio
as it is heard from the selected output (like connecting
a cable from the output back to the input).
REC 1/2…3/4
and
FX Control 1, 2
use the audio from
the selected bus.
IFX 1…12
,
MFX 1, 2
, and
TFX 1, 2
use the output of the
selected effect.
Channel Select [Stereo/L+R, Left, Right]
Stereo/L+R
: This selection routes a stereo signal to EX i
with stereo inputs, and an L+R summation to EX i with
mono inputs.
Left, Right
: This uses only a mono signal from the
selected channel.
2–6b: EX i 2
EX i 2 has the same controls as EX i 1, above.
2–6a
2–6b
2–6PMC
1–1a
1–1b