manualshive.com logo in svg

Korg Electronic Keyboard, Руководство по параметрам

Электронное клавишное устройство Kogan - отличный способ выразить свой талант в музыке. На нашем сайте вы можете бесплатно скачать инструкцию пользователя, чтобы научиться эффективно использовать это устройство. Загрузите ее с manualshive.com и создавайте удивительную музыку с помощью клавишного инструмента Kogan.

Поделиться
Скачать
background image

Program mode: HD-1

34

This setting does not limit the 

Unison

 

Number of 

Voices

 parameter. For instance, if 

Max # of Notes

 is set 

to 

6

, and

 Unison

 

Number of Voices

 is set to 

3

, you can 

play up to 6 notes, each with 3 Unison voices.

If the Program is set to 

Double

, the 

Max # of Notes

 

applies equally to both Oscillators. For instance, if 

Max 

# of Notes

 is set to 

4

, you can play up to 4 notes on 

each OSC

.

Chord

Chord

[Off, Bsc, Adv]

Off

 disables the Chord function.

Bsc

 (Basic) re-creates the chord mode of the KORG 

Polysix. Each time you play a new chord, it will cut off 
the previous chord. This option ignores the Voice 
Assign settings.

Adv 

(Advanced) uses the Program’s Voice Assign 

settings, as if each note in the chord was a transposed 
set of oscillators layered within the Program. 

Poly, Poly Legato, Single Trigger, Mono, Mono Legato, 
Legato Offset, Mono Priority, and Mono and Poly 
Unison all apply.

You can achieve the same effect as 

Bsc

, above, by 

setting 

Chord

 to 

Advanced

, 

Voice Assign

 to 

Mono

, 

Priority

 to 

Last Note

, and 

Legato

 to 

Off

.

For more information, see “Using Chord mode” on 
page 49 of the Operation Guide.

Source Pad

[1...8]

Chord mode uses the chords assigned to the Pads, and 
this selects which of the Pads to use. You can also 
choose chords using the Pads themselves; for more 
information, see “Selecting chords” on page 51 of the 
Operation Guide.

Unison

Unison

[On, Off]

Unison can be used in both 

Mono

 and 

Poly

 modes.

On (checked):

 When Unison is on, the Program uses 

two or more stacked, detuned voices to create a thick 
sound. 

Use the 

Number of Voices

 and 

Detune

 parameters to 

set the number of voices and amount of detuning, and 
the 

Thickness

 parameter to control the character of the 

detuning.

Off (unchecked):

 The Program plays normally. If 

Unison

 is 

Off

, then all of its associated parameters are 

grayed out. 

Number of voices

[2…16]

This controls the number of detuned voices that will be 
played for each note when using 

Unison

. It applies 

only when 

Unison

 is 

On

.

Stereo Spread

[0...100]

Stereo Spread

 lets you create a wider stereo field when 

using 

Unison

. It applies only when 

Unison

 is 

On

.

This feature separates the different Unison voices into 
two groups. One group is panned to the left, and the 
other to the right. At 

0

, both groups will be in the 

center; at 

100

, the two groups will be hard-panned left 

and right, respectively; at intermediate values, they 
will be panned to intermediate left and right positions.

If there is an odd number of voices, one voice will be 
panned to the center.

If the voices are true stereo, 

Stereo Spread

 “steers” the 

stereo image of each voice, similar to MIDI Pan 
(CC#10) and the Control Surface Pan knobs. In this 
case, intermediate settings of 

Stereo Spread

 may be 

the most effective, since they will still preserve some of 
the original stereo image.

Unison detuning is spread as evenly as possible across 
the left and right channels. The lowest voice will be on 
the left, and the highest on the right; the next-lowest on 
the left, and the next-highest on the right, etc., as 
below:

-14 cents: L

+14 cents: R

-10 cents: L

+10 cents: R etc.

Depending on the 

Thickness

 setting, the detuning 

may lean slightly to one side.

Detune

[0…200 cents]

Detune is available when 

Unison

 is 

On

. 

This parameter sets the tuning spread for the Unison 
voices, in cents (1/100 of a semitone). The 

Thickness

 

parameter, below, controls how the voices are 
distributed across the detune amount. When 

Thickness

 is 

Off

, the voices are distributed evenly, 

centered around the basic pitch. 

For instance, let’s say that the 

Number of voices

 

parameter is set to 

3

, 

Detune

 is set to 

24

, and 

Thickness

 is 

Off

:

Voice one will be detuned down by 12 cents, voice two 
will not be detuned, and voice three will be detuned 
up by 12 cents.

As another example, let’s say that 

Detune

 is still set to 

24

 and 

Thickness

 is still 

Off

, but 

Number of voices

 is 

set to 

4

:

Voice one will still be detuned down by 12 cents, voice 
two will be detuned down by 4 cents, voice three will 
be detuned up by 4 cents, and voice 4 will be detuned 
up by 12 cents.

Voice

Detune

1

–12

2

0

3

+12

Voice

Detune

1

–12

2

–4

3

+4

4

+12

Содержание Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Electronic Keyboard

Sven KB-E5500 User Manual preview
KB-E5500
Бренд: Sven Страницы: 4
NavInc CP-PEU-GV3 Manual preview
CP-PEU-GV3
Бренд: NavInc Страницы: 6
A4Tech RFKBSTX-5A User Manual preview
RFKBSTX-5A
Бренд: A4Tech Страницы: 9
PNI Escort P05 A User Manual preview
Escort P05 A
Бренд: PNI Страницы: 12
Palm 3245WW - Wireless Keyboard With Bluetooth Technology Disassembly Instructions Manual preview
3245WW - Wireless Keyboard With Bluetooth Technology
Бренд: Palm Страницы: 26
Yamaha piaggero NP-11 Owner'S Manual preview
piaggero NP-11
Бренд: Yamaha Страницы: 28
Yamaha porta sound pss-50 (Japanese) Owner'S Manual preview
porta sound pss-50
Бренд: Yamaha Страницы: 31
Yamaha P-70 Owner'S Manual preview
P-70
Бренд: Yamaha Страницы: 36
Yamaha P-85 Owner'S Manual preview
P-85
Бренд: Yamaha Страницы: 38
Yamaha P-60 Owner'S Manual preview
P-60
Бренд: Yamaha Страницы: 40
Yamaha Portable Grand DGX-220 Service Manual preview
Portable Grand DGX-220
Бренд: Yamaha Страницы: 52
Yamaha NU1 Maintenance Handbook preview
NU1
Бренд: Yamaha Страницы: 45
Yamaha PF-500 Installation Manual preview
PF-500
Бренд: Yamaha Страницы: 56
Yamaha P-70 Service Manual preview
P-70
Бренд: Yamaha Страницы: 57
Yamaha P-85 Service Manual preview
P-85
Бренд: Yamaha Страницы: 75
Yamaha P-250 Service Manual preview
P-250
Бренд: Yamaha Страницы: 88
Yamaha PF-500 Owner'S Manual preview
PF-500
Бренд: Yamaha Страницы: 108
Yamaha NP-V80 Owner'S Manual preview
NP-V80
Бренд: Yamaha Страницы: 104

Бренды по названию

Популярные бренды

Загрузить еще бренды