manualshive.com logo in svg

Korg Electronic Keyboard, Руководство по параметрам

Электронное клавишное устройство Kogan - отличный способ выразить свой талант в музыке. На нашем сайте вы можете бесплатно скачать инструкцию пользователя, чтобы научиться эффективно использовать это устройство. Загрузите ее с manualshive.com и создавайте удивительную музыку с помощью клавишного инструмента Kogan.

Поделиться
Скачать
background image

Program P0: Play    0–9: Control Surface

29

Pitch EG Release Time

. 

(–99…+99)

This scales the release times of the Pitch EG (or EGs, in 
the case of some EX

i

 instruments). 

Pitch LFO1 Intensity

.

 (–99…+99, CC#77)

This scales the effect of LFO1 on the Pitch. 

–99

 removes the LFO modulation entirely. 

+99

 means 

maximum modulation in the same direction, positive 
or negative, as the original Program. 

LFO1 Speed

.

 (–99…+99, CC#76)

This scales LFO1’s frequency. When the LFO is in 
MIDI/Tempo mode, this adjusts the Base Note. For 
more information, please see “Frequency” on page 84.

LFO1 Fade

. 

(–99…+99)

This scales LFO1’s fade-in time. For more information, 
please see “Fade” on page 85.

LFO1 Delay

. 

(–99…+99, CC#78)

This scales LFO1’s delay time - the time between note-
on and the onset of the LFO. For more information, 
please see “Delay” on page 85.

This parameter interacts with CC# 78.

LFO1 Stop

.

 (PROG/Off/On, Absolute)

This

 

Absolute

 

parameter controls whether

 

LFO1 is 

stopped or running. For more information, please see 
“Stop” on page 84.

The 

PROG

 setting restores the Program’s original 

values - convenient if Oscillator 1’s LFO was stopped, 
but Oscillator 2’s was not.

LFO2 Speed

. 

(–99…+99)

This scales LFO2’s frequency. When the LFO is in 
MIDI/Tempo mode, this adjusts the Base Note. For 
more information, please see “Frequency” on page 84.

LFO2 Fade

. 

(–99…+99)

This scales LFO2’s fade-in time. For more information, 
please see “Fade” on page 85.

LFO2 Delay

. 

(–99…+99)

This scales LFO2’s delay time - the time between note-
on and the onset of the LFO. For more information, 
please see “Delay” on page 85.

LFO2 Stop

. 

(PROG/Off/On, Absolute)

This

 

Absolute

 

parameter controls whether

 

LFO2 is 

stopped or running. For more information, please see 
“Stop” on page 84.

Common LFO Speed

. 

(–99…+99)

This scales the Common LFO’s frequency. When the 
LFO is in MIDI/Tempo mode, this adjusts the Base 
Note.

Unison

.

 (Off/On, Absolute)

This

 

Absolute

 

parameter turns 

Unison

 on and off. For 

more information, please see “Unison” on page 34.

# Of Voices

.

 (2…16, Absolute)

This

 

Absolute

 

parameter sets the number of Unison 

voices. If 

Unison

 is not 

On

, this parameter has no 

effect. For more information, please see “Number of 
voices” on page 34.

Detune

.

 (0.0…200.0, Absolute)

This

 

Absolute

 

parameter sets amount of detuning 

between the Unison voices. If 

Unison

 is not 

On

, this 

parameter has no effect. For more information, please 
see “Detune” on page 34.

Thickness

.

 (Off/01…09, Absolute)

This

 

Absolute

 

parameter

 

sets the pattern of detuning 

between the Unison voices. If 

Unison

 is not 

On

, or if 

Detune

 is set to 

0

, this parameter has no effect. For 

more information, please see “Thickness” on page 35.

Common Step Sequencer Smoothing

.

 (00…99, 

Absolute)

This

 

Absolute

 

parameter sets amount of smoothing for 

the Common Step Sequencer. Note that this applies 
only to EX

i

 Programs. For more information, please see 

“Smoothing” on page 166.

HD-1 Tone Adjust Parameters

Macro parameters

The following three parameters affect both Oscillator 1 
and Oscillator 2.

* In the list below, the items in parentheses are 
(value, edit type) respectively.

Pitch Stretch

.

 (–12…+12, Relative)

This special control increases the Oscillator 

Tune

 

parameter while lowering the 

Transpose

 parameter. 

The result is that the pitch stays the same, but the 
mapping of the samples to the keys changes. You can 
use this to create interesting shifts in timbre.

Hold

.

 (Off/On, Absolute)

This lets you turn Hold on and off. For more 
information on this parameter, see “Hold” on page 35.

Reverse

.

 (PROG/Off/On, Absolute)

This provides a quick way to turn Reverse on or off for 
all Multisamples in both Oscillators. 

PROG

 restores 

the Program’s original settings.

Per-Oscillator parameters

These parameters affect each Oscillator separately. In 
the list, the parameters for Oscillator 1 appear first, 
with each name prefaced by [OSC1]; the parameters 
for Oscillator 2 appear next, prefaced by [OSC2].

Unless otherwise specified, all of the Per-Oscillator 
parameters are 

Absolute

.

* In the list below, the items in parentheses are 
(value, edit type) respectively.

Tune

.

 (–1200…+1200, Relative)

This 

Relative

 parameter adds to or subtracts from the 

Oscillator’s Tune setting, as described under “Tune” 
on page 48.

NOTE

: as with 

Transpose

, below, this is a simple 

addition or subtraction, as opposed to the more 
complex “scaling” function.

Transpose

. 

(–60…+60, Relative)

This 

Relative

 parameter adds to or subtracts from the 

Oscillator’s Transpose setting, as described under 
“Transpose” on page 48.

MS/WS/DKit Select

. 

(PROG/0…16383, Absolute)

In Single or Double Programs, this lets you select a 
new Multisample or Wave Sequence for the Oscillator. 
In Drum Programs, it lets you select a different Drum 
Kit. In general, it’s best to use this in conjunction with 
the 

MS/WS Type

 and 

MS/WS/DKit Bank

 parameters, 

as described below.

Содержание Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Electronic Keyboard

Radio Shack MD501 User Manual preview
MD501
Бренд: Radio Shack Страницы: 12
Canyon Velvet Tread HKB-W20 Quick Manual preview
Velvet Tread HKB-W20
Бренд: Canyon Страницы: 2
Clavia Nord Modular G2 Service Manual preview
Nord Modular G2
Бренд: Clavia Страницы: 16
Bosch purion 1 270 020 916 Operating Instructions Manual preview
purion 1 270 020 916
Бренд: Bosch Страницы: 75
Philips SPK3700BC Specifications preview
SPK3700BC
Бренд: Philips Страницы: 2
Philips SPK2700BC/27 Specifications preview
SPK2700BC/27
Бренд: Philips Страницы: 2
Cub VS-95A043 User Manual & Installation Manual preview
VS-95A043
Бренд: Cub Страницы: 16
Franklin BOOKMAN BDS-2023 User Manual preview
BOOKMAN BDS-2023
Бренд: Franklin Страницы: 19
Franklin DEUTSCH-ENGLISCH LEXIKON BQD-210 User Manual preview
DEUTSCH-ENGLISCH LEXIKON BQD-210
Бренд: Franklin Страницы: 13
Ranger PALMTOP Keyboard II User Manual preview
PALMTOP Keyboard II
Бренд: Ranger Страницы: 7
J.Burrows JBTRACKBD Instruction Manual preview
JBTRACKBD
Бренд: J.Burrows Страницы: 9
Hama SL532 User Manual preview
SL532
Бренд: Hama Страницы: 1
Hama PK 300 Operating Instruction preview
PK 300
Бренд: Hama Страницы: 4
Gigabyte Force K7 Quick Start Manual preview
Force K7
Бренд: Gigabyte Страницы: 45
Echomaster SSM-DIS User Manual preview
SSM-DIS
Бренд: Echomaster Страницы: 14
Franklin TMQ-106 User Manual preview
TMQ-106
Бренд: Franklin Страницы: 22
GameSir GK300 User Manual preview
GK300
Бренд: GameSir Страницы: 14
AFX AFXMK0217 Instruction Manual preview
AFXMK0217
Бренд: AFX Страницы: 10

Бренды по названию

Популярные бренды

Загрузить еще бренды