Korg EC350, Руководство пользователя, Страница: 22 / 230

20 Chapter 3
1
Hold down the REVERB or CHORUS button, and press either the PIANO 1/L,
PIANO 2/M, or E.PIANO1/H sound selection button to select the reverb or chorus
depth.
2
When the reverb or chorus is assigned, release the REVERB or CHORUS button.
To check the currently selected reverb or chorus depth, hold down the REVERB or
CHORUS button, and look at which of the above LEDs is turned on.
To turn the reverb or chorus off, press the REVERB or CHORUS button. The LED
on the button will turn off.
Using the pedals
This instrument has three pedals: damper, sostenuto, and soft. They can be used to
make your performance more expressive.
Damper pedal. While you continue pressing the pedal, the sound will be sus-
tained, and a rich resonance will be produced. The depth at which you press the
pedal will adjust the degree of the damper effect (Half-damper effect).
Sostenuto pedal. The damper effect will be applied only to notes which were
already held while the pedal was pressed, so that these notes will continue sustain-
ing while the pedal remains pressed. The damper effect will not apply to any new
notes played after the sostenuto pedal is pressed.
Button Reverb depth Chorus depth
PIANO 1/L Light reverb Light chorus
PIANO 2/M Normal reverb Normal chorus
E.PIANO 1/H Deep reverb Deep chorus
Soft pedal
Sostenuto pedal
Damper pedal