microKORG
EasyStart
5
SHIFT Key Functions
There are many functions you can access by holding the
SHIFT
key and pressing another key on the microKORG. Below is a
listing of those functions. For more information on each function please refer to the
microKORG Owner’s Manual
starting on
page 59.
•
Copy Timbre –
SHIFT
and
PROGRAM NUMBER 1
•
Swap Timbre –
SHIFT
and
PROGRAM NUMBER 2
•
Initialize Program -
SHIFT
and
PROGRAM NUMBER 3
•
Initialize Level (Vocoder programs only) -
SHIFT
and
PROGRAM NUMBER 1
•
Initialize Pan (Vocoder programs only) -
SHIFT
and
PROGRAM NUMBER 2
•
MIDI Filter -
SHIFT
and
PROGRAM NUMBER 4
•
Control Change Assign -
SHIFT
and
PROGRAM NUMBER 5
•
MIDI Data Dump -
SHIFT
and
PROGRAM NUMBER 6
•
Factory Preload -
SHIFT
and
PROGRAM NUMBER 7
•
Write Protect -
SHIFT
and
PROGRAM NUMBER 8
•
Timbre Solo –
SHIFT
and
FORMAN T HOLD/TIMBRE SELECT
•
Switch Edit Select –
SHIFT
and
A SIDE B
•
Inc/Dec Parameter Value –
SHIFT
and OCTAVE SHIFT
UP
(Inc) or
DOWN
(Dec)
•
Compare –
SHIFT
and OCTAVE SHIFT
UP
and
DOWN
simultaneously
•
Demo Mode –
SHIFT
and ARPEGGIATOR
ON/OFF
Important Owner’s Manual references:
There are many important references to modes and applications in the
microKORG Owner’s Manual
. Some of these references
are listed below:
EDIT SELECT 1 Parameters
pgs. 15 - 29
EDIT SELECT 2 Parameters
pgs. 30, 39 – 47, 51
Changing MIDI Control Change Numbers
pg. 61
Syncing to External MIDI Clock
pg. 51
Shift Key Functions
pgs. 59 - 64
