Korg D1600 Скачать руководство пользователя страница 139

Страница: 139 / 152

137

Connect the cable to the CD drive.

Connect the 40 pin flat cable, audio cable, and
power supply cable (attached to the CD drive car-
tridge) to the hard disk.
Be careful that the connectors are oriented cor-
rectly, and that they are pushed in all the way.

Fasten the CD drive in the CD drive cartridge.

Use the screws included with the CD drive to fas-
ten it in place.

Insert the CD drive cartridge into the D1600.

Push it firmly in all the way.

Using the screws that you removed in step

, fas-

ten the CD drive cartridge to the D1600.

Close the front cover.

If you have installed the CD drive, remove the
drive bay cover before closing the front cover.

Checking the operation of the internal CD-R/RW drive

Turn on the power as described in the power-on
procedure, and verify that the D1600 starts up cor-
rectly. (

→

p.18)

Turn on the power of the D1600, and make sure
that the start-up LCD screen shows that the inter-
nal CD-R/RW drive has been detected.

If the D1600 does not recognize the internal CD-R/
RW drive, try reinstalling the internal CD-R/RW
drive.

Appendices

About the drive

Содержание D1600

























































































































































Результаты поиска

Содержание D1600

Отзывы:

Бренды по названию

Популярные бренды

Korg D1600, Руководство пользователя

Результаты поиска

Содержание D1600

Отзывы:

Бренды по названию

Популярные бренды