T
roubleshooting /
Specificasions
23
Troubleshooting
Power does not turn on
• Is the power cable connected to the C-3200?
• Is the power cable connected to an appropriate AC outlet?
• Is the power switch turned on? (
☞
p.7)
• Did you verify that the outlet is working? (Plug a
device known to be working into the same outlet.)
• If the power still does not turn on, unplug the power
cable from the AC outlet, and contact the distributor
for your country.
No sound
• The C-3200's Volume slider may be set to “0”. (
☞
p.7)
• A plug may be inserted in the headphone jack.
• Have you made settings so that the selected part will
play back? (
☞
p.18)
• Has performance data been recorded for the selected
part? (
☞
p.18)
• Make sure that the Local setting is turned On. (
☞
p.20)
Notes are interrupted
• You have exceeded the maximum polyphony.
If you exceed the maximum polyphony, the C-3200 will
turn off a currently-sounding note and give priority to the
last-played note. This means that a currently-sounding
note will be interrupted.
For sounds other than Piano 1, the maximum polyphony
is 64 notes. However, Piano 1 uses two notes of data,
meaning that the maximum polyphony will be 32 notes.
When using the damper pedal, when using the Layer
function to play two sounds together, or when
playing back recorded data using multiple sounds,
you should keep the maximum polyphony in mind as
you select sounds.
Something is wrong with the pitch or
tone of a piano sound in a specific range
• The piano sounds of the C-3200 re-create the sound of
a piano as faithfully as possible. This may mean that
certain overtones may appear to be louder in some
ranges, or you may notice differences between
different pitches or ranges. This is not a malfunction.
Pedal functions do not work correctly
• Is the pedal connector plugged in correctly? (
☞
p.26)
• If the pedal effect does not work when using Layer or
Split, make the settings once again. (
☞
p.13)
Can't record
• Is there enough free space in the recorder? (
☞
p.18)
External device does not respond to
the transmitted MIDI data
• Make sure that the MIDI cable is connected correctly.
(
☞
p.19)
• Make sure that the C-3200 is transmitting MIDI data
on the same channel as selected on the receiving
device. (
☞
p.19)
Specifications
Keyboard
88 key (A0–C8)
RH2 (Real Weighted Hammer
Action 2) keyboard
Sounds
9 sounds: Piano 1
Piano 2
E.Piano 1
E.Piano 2
Harpsichord
Pipe Organ
E.Organ
Strings
Bass (when using Split)
Tone generator system
Stereo sampling
Maximum polyphony
64 notes
Effects
Reverb (3 levels)
Chorus (3 levels)
Brilliance (3 levels)
Recorder
2 parts
maximum 14,000 notes
Tempo
Metronome
Record
Start/Stop
Pause
Keyboard modes
Single, Layer, Split
Temperaments
3 (Equal Temperament,
Kirnberger, Werckmeister)
Touch Control
3 curves (Light, Normal, Heavy)
Controls
Power switch
Volume slider
Split switch
Transpose/Function switch
Touch switch
Brilliance switch
Reverb switch
Chorus switch
Sound selector switches
Tempo slider
Metronome switch
Demo switch
Pedals
Soft*
Sostenuto
Damper*
(*: half-pedaling supported)
Connectors
Headphone jacks x 2
MIDI connectors (IN, OUT)
Input jacks (L/MONO, R)
Output jacks (L/MONO, R)
Main amp
20 W x 2
Speakers
16 cm x 2
Power supply
117 V
54 W
230 V
52 W
Dimensions (W x D x H) 1,391 x 462 x 882 mm /
54.76 x 18.19 x 34.72 inches
(including stand; with music
stand folded down)
Weight
47 kg / 103.62 lbs. (with stand)
Included items
Special stand
Power cable
* Specifications and appearance are subject to change
without notice for product improvement.
· Sound processed with INFINITY (TM).
