48
STP Forward Delay
: STP Forward Delay is the time spent in detecting and learning network tree
topology state before entering the forward state. Default time value is 1 sec.
GPS Coordinate Settings
The GPS Coordinate Setting helps you mark the latitude and longitude of the JetWave 2450v2.
Just enter the coordinates and click the
Apply
button.
TCP/IP Settings
Open “
TCP
/
IP Settings
” in “
System
” as below to configure the parameters for LAN which connects to
the LAN port of the JetWave 2450v2. In this page, users may change the settings for IP Address,
Subnet Mask, and DHCP Server.
Obtain IP Address Automatically
: If a DHCP server exists in your network, you can check this
option, thus the IEEE 802.11n JetWave 2450v2 is able to obtain IP settings automatically from
that DHCP server.
When the IP address of the JetWave 2450v2 is changed, the clients on the network
often need to wait for a while or even reboot before they can access the new IP address.
For an immediate access to the bridge, please flush the netbios cache on the client
computer by running the “nbtstat –r” command before using the device name of the
JetWave 2450v2 to access its Web Management page.
In case the IEEE 802.11n JetWave 2450v2 is unable to obtain an IP address from a
Note:
