Korenix JetWave 2111 Series, Руководство пользователя

Страница: 23 / 99

JetWave 2111/2411 Series User Manual
Page 20
Chapter 3 Prepare for Management
The JetWave 2111/2411 Series supports Web GUI Configuration, Simple Network Management
Protocol (SNMP), Telnet and Diagnostic Command Line Interface for management and Window Utility
helps you discover the device cross network, basic IP setting, firmware management…etc.
This chapter describes the preparation for management. In your first time access the device, you can
refer to the Basic Factory Default Settings to know the default settings and the default IP of the device.
The chapter also tells you how to login the Web-based interface, Diagnostic Console. If you forget IP
address you changed, you can use Korenix View Utility (refer to next chapter) to discover the devices’
IP address and then access it.
3.1 Basic Factory Default Settings
We’ll elaborate the JetWave 2111/2411 Series basic factory default settings. You can re-acquire
these parameters by default. This info is easier for you to find the device and access the switch’s
configuration interface. For further info, please refer to configuration guide of the feature set.
Table 1 JetWave 2111/2411 Basic Factory Default Settings
Features Factory Default Settings
Username admin
Password admin
Model Name
JetWave2111 (2411 depends on
which model you access)
Device Name
korenixXXXXXX (X represents the last 6
digits of Ethernet MAC address)
Default IP at Bridge Mode (JetWave 2111/2411 Default)
Access Type Static IP
IP Address 192.168.10.1
Subnet Mask 255.255.255.0
Default Gateway 0.0.0.0
Primary DNS Server 0.0.0.0
Secondary DNS Server 0.0.0.0
Remote Settings
Remote Management
Privacy
Telnet, SNMP, SNMP Trap, Email Alert
Even Warning Type
WLAN association, Authentication fail,
Configuration Changed
Version 2/3
Server Port: 161