Korenix JetPort 5208, Руководство пользователя

Страница: 65 / 90

59
Chapter 6. Out of Band Operation
Indirect PPP Connection
This method uses a modem connection to phone into the JETPORT 5208 /
JETPORT 5216 from a remote location.
Setup:
1. Set up your hardware configuration to match the diagram, below:
JETPORT 5208 / JETPORT 5216
Serial Modem Cable
Ethernet to
Remote
Operator
Phone Line
Serial
cable
Modem Modem
̝ ʳʳʳ On the remote computer side, use a standard 9 pin serial modem cable
(pin 2 to pin 2; pin 3 to pin 3) to connect the computer to the modem.
̝ ʳʳʳ
On the JETPORT 5208 / JETPORT 5216 side, use Cat 5 cable and an
Optional: RJ-45 to Serial Cable
Note:
Be sure that the port you specify as the Console Port in the OOBC
dialog box matches the port that you connect the modem to. Change
the setting, if necessary.
2. Set up your connection configuration as specified in Steps 2 - 8 of the
Direct Dial In Connection , section.
3. For Step 9, key in the JETPORT 5208 / JETPORT 5216's modem
telephone number in the fields provided, then click Next .
4. Click
Finish
.
A new icon that you can use to connect to the JETPORT 5208 / JETPORT
5216 is created in the
Dial-up Network folder. This completes the Indirect
Dial In setup.