Korenix JetNet 6710G, Быстрое руководство по установке

Страница: 5 / 52

Step -1: Slide component 4, 5, 6 and then 7 over the console
cable. Keep them loose. Do not tighten them yet. 2 cable glands
are provided for cable diameter from 3.5 to 5.8 mm. Choose the
one that best fits the cable.
Step-2: Solder the conductors with the copper
wires according to the pin assignment. The
soldering side view of the pin is shown as below:
Console port pin assignment
Step-3: Fasten the components
4, 5, 6 and 7 in sequence. Be
sure the gasket is on the right
position. See the below M12
assembly diagram:
2. Insert part 6-seal into part 5.
4. Finalized
1. Assembly part 1 and 4,
ensure the solder pins are
protected by part 4-gasket,
then locking part 1 and 5.
3. Locking part 5 and 7.
Never install or work on/with the equipment or the
cabling during the period of its lightning activity.
3.3 Assembly of Ethernet Patch Cables
You can connect terminal devices and other segments via twisted pair cables. Ports which
are not assigned should be closed with the covering caps contained in the package list of
delivery to guarantee the connector is clear without rust.
!