
Features:
- With laser point aiming
- Foot/Meter function button
- Liquid crystal screen on a luminous
background
- Automatic stop
- 3 memories
- Calculation of area and volume
- Addition and Subtraction function
Installation of the battery:
1. Slide the lid of the battery compartment in the direction of
the arrow to open it.
2. Place the battery (9V battery - type 6LR61) in the
compartment and over the ribbon, as indicated by the
markings of the polarity (+ and -) symbols inside it.
3. Put the lid back in place. As soon as the low-battery warning
appears or the distance measurer does not work correctly, the
battery must be replaced.
CAUTION:
Worn out batteries must be disposed of rapidly and cleanly.
Do not burn or bury them.
At the end of its travel, the laser beam should always encoun-
ter a diffuse reflection material (examples: a wooden plank).
Class 2 Laser Radiation When open, do
not stare into the beam.
Do not direct the beam in the direction of people or animals
around you.
Setting of distance measurer
Your distance measurer is sensitive to temperature and
humidity changes. Before use, wait about 15 min to allow it to
adjust to room temperature.
9