17
WARNING
Please read the manual carefully before using the product.
Always observe the safety instructions contained in this manual as well as additional safety measures. The fol-
lowing symbols are used throughout this manual:
Indicates the risk of personal injury or tool damage.
ADDITIONAL SAFETY INSTRUCTIONS FOR COMPATIBLE ELECTRIC TOOLS
Do not use this tool on light metal with magnesium content higher than 80% due to the flammability of this par-
ticular type of metal.
Make sure that the accessories used are suitable to withstand the maximum speed indicated in the datasheet.
Make sure the accessories are mounted according to the instructions.
Make sure sparks do not hit people or ignite flammable materials.
Always wear protective goggles, hearing protectors, and, if necessary, other protective measures such as work
gloves, helmet, etc.
ELECTRIC SAFETY STANDARDS
Always check that the power supply corresponds to the voltage indicated on the nameplate.
DESCRIPTIONS
This compact DIY power tool has been designed to drill,
engrave, sand, cut, mill and grind wood, metal, plastic
and stone.
1) On / off switch
2) Speed selector
3) Spindle lock button
4) Collar nut
5) Carbon brush holder
ATTACHING ACCESSORIES
BEFORE MOUNTING AN ACCESSORY. ALWAYS UNPLUG THE DEVICE FROM THE ELECTRIC SOCKET
-
Hold down the lock button (3B)
- Use the key (8A) to loosen the collar nut (4B)
- Insert the accessory shaft into the collar
- Use the key to tighten the collar nut
- Release the spindle lock button
- To remove the accessory proceed in the reverse order
FIGURE B
