SETTING UP YOUR OVEN
Remove the oven and all materials from the carton and oven cavity. Your oven comes with the
following
. When installing the oven, be sure to leave a space of at least 10 cm at the back and
sides of the oven and 30 cm from the top to ensure proper ventilation.
2. Remove all packaging materials inside the oven. Install the support ring and
turntable. Check that the turntable turns freely.
3. The microwave oven must be positioned so that the plug is accessible.
- NEVER block the air openings as the oven may overheat and switch off
automatically.
It will remain inoperable until cooled down.
- For your personal safety, plug the cable into a properly earthed 230 V~ 50 Hz AC
socket. If you have any doubts about the effectiveness of the earthing of your
system, consult a qualified installer. If the power cable is damaged, have it replaced
by a qualified person in order to avoid danger.
- DO NOT install the microwave oven in very hot or humid places such as near a
conventional oven or radiator. The oven's power supply specifications must be
respected and any extension cable used must have the same specifications as the
power cable supplied with the oven. Clean the inside and the door gasket with a
damp cloth before using the microwave oven for the first time.
ACCESSORIES:
Names of Oven Parts and Accessories
1 Glass tray
1 Turntable ring assembly
1 Instruction Manual
A) Control panel
B) Turntable shaft
C) Turntable ring assembly
D) Glass tray
E) Observation window
F) Door assembly
G) Safety interlock system
TURNTABLE INSTALLATION
a. Never place the glass tray upside down.
The glass tray should never be restricted.
b. Both glass tray and turntable ring assembly
must always be used during cooking.
c. All food and containers of food
are always placed on the glass tray for cooking.
d. If glass tray or turntable ring assembly
cracks or breaks, contact an authorized
service center.
Turntable ring assembly
Turntable shaft
Glass tray
Hub (underside)
28
Содержание 5914418
Страница 1: ...5914418 ...
Страница 2: ... ...