23
1) Place the heater on a flat, stable and non-slip surface.
2) Plug the appliance to the power socket and make sure first that the ope-
rating knob is on the OFF position.
3) Turn the operating knob to the left on the “450W” position in order to ope-
rate one. Turn the operating knob to the left on the “900W” position to start
both resistances.
4) Set the operating knob to the right on the 450W Turn” position to start at
the same time both the resistance and the swinging function (120°). Set the
operating knob to the left on the “900W Turn” position to start both resistan-
ces and the swinging function (120°) at once.
5) Set the power supply switch to the right of “450W Turn” position, means
one heating tube and oscillation work together when power is 450W. Set the
power supply switch to the right of “900W Turn” position, means two heating
tube and oscillation work together when power is 900W.
4. HOW IT WORKS
5. CLEANING AND MAINTENANCE
This appliance does not need any particular maintenance except for the ex-
ternal cleaning.
Switch the appliance off and only then unplug it from the power socket.
Then, clean the appliance by using a soft and dry cloth from any dust residue
and clean the grids with a soft bristle brush.
Do not immerse into water!
