HOW TO FILL WATER
DRY IRONING
STEAM FUNCTION
CARE AND CLEANING
STORAGE
1. Before fi lling water, please pull un-plug fi rst.
2. Set the steam control button to “0” position.
3. Fill water through the inlet to “MAX” level of the water tank by using the jug.
4. If the water in your area is particularly hard, it is advisable to use distilled or demineralized water.
5. Do not use chemically descaled water or any other liquids for refi lling.
6. After ironing, unplug and allow the iron to cool. Turn the iron upside down and allow the water to drain out.
1. Plug into the power supply.
2. Turn the temperature control in a clockwise direction; select ● (1 dot), ●● (2 dots) or ●●●
(3 dots) according to the recommendation of the garment label.
3. Indicator light will light up, then put the iron on a smooth and stable surface vertically.
4. When the required temperature is reached, the indicator light goes off . The iron is ready for use.
1. Fill the water tank with water.
2. Plug into the power supply.
3. Turn the temperature control in a clockwise direction to “●●●”(3 dots) setting (do not use 1 dot or 2 dots setting for
steam ironing). Indicator light will light up indicating the iron is switched on.
4. After the indicator light switches off , which indicates that the selected temperature has been reached.
5. Turn the steam control button to the required position. Steam will be sprayed and you can start ironing.
6. During breaks in ironing, stand the iron upright.
7. When you are fi nished ironing, pull out the plug from the power supply. Pour the remaining water out and leave the
iron to cool.
1. Turn the temperature control to “0”, then disconnect the iron from the wall outlet and let it cool down completely.
2. Deposits and other residues on the soleplate can be removed with a cloth soaked in a diluted vinegar/water solution.
3. To clean the exterior of your iron, wipe with a damp soft cloth and wipe dry.
4. Do not use scouring pads, abrasives or harsh cleaners to clean the soleplate.
5. Keep the soleplate smooth; do not iron over sharp objects such as buttons, studs, and zippers.
1. Turn the steam control button and temperature control to “0”.
2. Disconnect the iron from the wall outlet.
3. Hold the iron upside down and gently shake it to remove the water remaining in the water tank.
4. Stand the iron upright and let it cool down completely.
5. Always store the iron on its heel rest.
6. Do not store the iron with the soleplate facing down, or in the carton.
