Kooltronic KP2E192/40, Руководство оператора

Страница: 3 / 7

3
II. Incoming Inspection
Pagoda Packaged Blowers are designed, built, and packaged to withstand the shock and vibration associated
with shipment by common carriers. Occasionally improper handling during shipping causes damage.
Therefore, a thorough inspection should be performed upon receipt of all shipments. Any carton tears, dents,
scratches, or loose articles should be noted on the Freight Bill. Cartons should be opened promptly and the
units inspected for CONCEALED DAMAGE
.
An immediate claim MUST be filed with the freight carrier and an inspection requested. Retain all packing
materials. Kooltronic cannot assume responsibility for Consignee's failure to file a timely freight claim.
III. Product Handling
■
Do not attempt to operate your Pagoda unit until you read and thoroughly understand this Manual.
■
Before operating this unit, all electrical wiring must be checked to assure the proper connections.
IV. Product Identification and Nameplate
Each Pagoda unit includes an identification nameplate. This nameplate provides:
V. Installation Instructions
The Pagoda Series uses motorized impeller blowers for maximum efficiency and performance at reduced noise
levels and have been designed for mounting on the top or sides of the cabinet. Air flows out of the cabinet into
the inlet of the blower, exiting on all four sides. A three foot [0.9m] (minimum) 3-wire power cord is standard with
these units. See page 4 for location of mounting holes.
CAUTION
Operate this unit only on the proper voltages and frequencies as noted on the nameplate
➀
Model Number
➁
Electrical Power Characteristics
➂
Date of Manufacture
We recommend you copy this information from your
unit.
➀
When ordering parts, specify
the Model Number.
➁
Before operating, be sure
that the power source
matches these requirements.
KP2E192/40
115V 50/60HZ
11/07
➀
➁
➂