Kooltronic Guardian K3NA4C3DP24L, Руководство оператора

Страница: 7 / 17

Principles of Operation (con’t)
RESETTING
If it becomes necessary to reset the unit, the factory settings are as follows:
7
PARAMETER DESCRIPTION VALUE UNIT
RANGE
MINIMUM MAXIMUM
SEt Set Point 75 °F 60 95
Hy Differential 10 °F 1 45
dP4 Fourth probe display 0 -- -- --
dP3 Third probe display 0 -- -- --
dP2 Evaporator probe display 0 -- -- --
dP1 Room probe display 0 -- -- --
AFH Differential for temperature alarm recovery 2 °F 1 45
ALL Minimum temperature alarm 35 °F -67 120
ALU Maximum temperature alarm 120 °F 35 302
SHy Differential for auxiliary relay 5 °F 1 45
SAA Set point for auxiliary relay 115 °F -67 302
ACH Kind of action for auxiliary relay CL -- -- --
AC Anti-short cycle delay 2 min 0 50
odS Outputs delay at start up 0 min 0 255
P2P Evaporator probe presence n -- -- --
ot Thermostat probe calibration 0 °F -21 21
US Maximum set point 95 °F 75 302
LS Minimum set point 60 °F -67 75
Ptb Map code 7 -- 0 65535
rEL Software release 0 -- -- --
rSE Real set point 0 -- -- --
onF on/off key enabling ES -- -- --
PbC Kind of probe ntc -- -- --
Adr Serial address 1 -- 1 247
HES Differential for energy saving 0 °F -54 54
rrd Regulation restart with door open alarm y -- -- --
odc Compress status when open door no -- -- --
nPS Number of activation of pressure switch 15 -- 0 15
did Digital input alarm delay 5 min 0 255
i1F Digital input configuration EAL -- -- --
i1P Digital input polarity cL -- -- --
dAO Delay of temperature alarm at startup 00:00 h -- --
ALd Temperature alarm delay 0 min 0 255
ALc Temperature alarms configuration Ab -- -- --
ArP Probe selection for auxiliary alarm P1 -- -- --
dLy Display temperature alarm 00:00 min. 0 20
Lod Probe displayed P1 -- -- --
rES Resolution in -- -- --
CF Temperature measurement unit F -- -- --
CH Kind of action: heating cooling cL -- -- --
COF Compressor OFF time with faulty probe 4 min 0 255
COn Compressor ON time with faulty probe 20 min 0 255
O4 Fourth probe calibration 0 °F -21 21
P4P Fourth probe presence n -- -- --
O3 Third probe calibration 0 °F -21 21
P3P Third probe presence n -- -- --
OE Evaporator probe calibration 0 °F -21 21