STEP 5
SCREW ALL ADJOINING WINERACKS TOGETHER :
BEFORE ATTACHING TO WALL : For a professional look, install a Base
Trim Kit* (shown on the last page) before mounting rack to wall.
To avoid cracking of wood, pre-drill 1/16” holes for screws ( figure A ).
Curved corner modules
MUST be securely fastened to adjacent racks.
Fasten through adjoining vertical bars with 7/8” screws. Also fasten
through rear bars of adjoining column sections as well as the front
( figure B ).
When stacking units on top of one
another, fasten adjoining horizontal
bars with 7/8” screws at two places
per module. Also fasten through
rear bars of adjoining column sec-
tions as well as the front (figure B).
For additional strength and stability,
we strongly recommend you fasten
through bottom horizontal bars into
the floor or base with 7/8” screws
or nails.
A
B
A
B
