KoolMore Undercounter KM-BIR3C-GD, Руководство пользователя

Страница: 9 / 13

inside electrical parts.
Cleaners: Never use harsh, abrasive cleaners, heavy-duty cleaners, or solvents on any surface.
Exterior: Wipe with damp, sudsy cloth, rinse and dry. For stubborn stains and for periodic waxing,
use silicon wax.
Refrigeration Section: Wash shelves and other removable parts in warm sudsy water, rinse and dry.
Wash interior with baking soda solution (3 tablespoons to I liter of water) or warm sudsy
water, rinse and dry.
Magnetic Door Seals: Wash with warm sudsy water.
HOW TO INSTALL
This appliance can either stand alone or be built in. The front grill must be not obstructed.

Install the unit in a convenient location away from extreme heat and cold. This unit should be far
away from the heating source, such as stoves, heaters, or radiators, and from direct sunlight.
Allow sufficient clearance between the unit and sidewall so the door will open without
obstruction.

Place the unit on a level surface that will be strong enough to support the unit when it is fully
loaded. Not recommended for carpeting or other soft / uneven surfaces. To level your fridge,
adjust the front feet located at the bottom of the unit.

For under-counter built-in installation, please following the following diagram, and leave the
enough space for the unit.

For free standing installation, we suggest to allow 2 inches of
space between the unit’s side, rear, and the wall. In addition,
sufficient clearance (160°) should be maintained to allow the
glass door to open properly and completely.
8