5
10.1.1 1s display/sets the set point
10.1.2 more than 3s access the parameter setting menu (enter password 22)
10.1.3 mutes the audible alarm(buzzer)
10.2 rapid selection of probe displayed for 1s displays firmware version
Display”rd” set point differential “4”
Display “co” the compressor starts over time “2”
Display”di” interval between six defrosts”6”
Display”dt” end defrost temperature “20”
Display”dp” maximum defrost duration “10”
10.3 Press “set” buttom, more than 3s, LED screen setting 2 times.
11.Green-----System Switch
Red------Illumination Switch
Cleaning process of refrigerator
：
1. Clean refrigerator shelf
When cleaning the refrigerator, first disconnect the power of the refrigerator, then take out all the food
in the refrigerator, and then take out the shelves, fruit and vegetable boxes and bottle frames in the
refrigerator refrigeration room. Be careful when you take them out. When cleaning, wipe it with a rag
dipped in water mixed with detergent. After cleaning, wipe it with a rag, and then dry it in a ventilated
and dry place.
2. Clean up places where dirt and dirt are stored
We must pay attention to cleaning and cleaning with the old toothbrush first with detergent, then wipe
the grooves, then wipe them with dry cloth, or use paper towels dipped with detergent. Clean with
chopsticks or alcohol.
3. Cleaning of Heat Dissipating Door Plate
When cleaning, just use a clean brush or dry cloth to remove dust, but be careful not to use wet cloth.
