6
GENERAL INFORMATION
1) Ice-making and its water tank parts
A. Water dividing pipe
：
with nine little holes, water will flow out from these little holes. And if no
water flows out, can be disassembled and cleaned.
B. Evaporator (ice-making module)
C. Ice full detecting board: Use to detect the inner cabinet is full of ice or not, and to check the the
ice-harvest process is over or not.
D
．
Water tank
：
E
．
Water supplying pipe
：
F
．
Cover board on the right side of the evaporator
：
G
．
Water level switch installing plate
：
H
．
Water drain pipe of the water tank
：
when ice-making, this pipe should be clamped in the slot of
the water tank wall; And when draining, this pipe should be pulled out.
I
．
Water pump
：
J
．
Water level detecting switch
6
