OPERATION INSTRUCTION
Starting the unit
1. Firstly, turn the humidity control switch to the “OFF” position.
2. Plug in the dehumidifier.
3. Turn on the humidity control switch(to right side) and turn the same switch to the reading of the desired
humidity(60% in general as shown on position”4”).
Turning off the unit
1. Turn the humidity control switch to the left side to the “OFF” position and the power supply is cut off and the unit
stops in operation.
2. If the dehumidifier is not in use for a long time, please disconnect the power cord plug from the outlet.
PRECAUTIONS
1. The dehumidifier shall not operate if the humidity setting is higher than the ambient humidity.
2. Drain the water in the water storage tank when the water in the tank is full and the water level indicator lamp
illuminates red. And then install the empty water tank back to its position, so the unit can continue its operation
and the indicator lamp illuminates green.
3. When the unit stops, you have to wait for 3 minutes before you can restart the unit to protect the compressor
from damage.
4.The humidify and its related position number on the humidity control switch:
CONTROL SWITCH
POSITION NO.
APPROXIMATE
HUMIDITY SETTING
9
10
﹪
7
30
﹪
5
50
﹪
3
70
﹪
1
90
﹪
Содержание Comfort 40
Страница 1: ...Comfort 40 DEHUMIDIFIER USER MANUAL...
