5
Operation Introduction
Notice:
- Operation temperature range:
MAXIMUM HEATING
MINIMUM HEATING
DB/WB (C)
27/---
0/---
MAXIMUM COOLING
MINIMUM COOLING
DB/WB (C)
35/24
16/12
1.
Before Using
Check whether the exhaust hose has been mounted properly.
Cautions for cooling and dehumidifying operations:
- When using functions on cooling and dehumidifying, keep an interval of at least 3 minutes
between each ON/OFF.
- Make sure the water pump is mounted correctly.
- That the power supply meets the requirements.
- The socket is for AC use.
- Do not share one socket with other appliances.
-
Power supply is AC220--240V50Hz
2. Cooling operation
-
Press the “Mode” button till the “Cool” icon appears.
- Press the “
+"
or “
-
” button to select a desired room temperature. ( 1 6 - 3 1 )
-
Press the “Fan Speed” button to select wind speed.
3. Dehumidifying operation
Press the “Mode” button till the “Dehumidify Indicator Lamp” blinks
-
Set the selected temperature to current room temperature minus 2 .
( 1 6 -3 1 ) - Set the fan motor to LOW wind speed.
4.
Heating operation (this function is not available for a cold- only Unit)
Press the “Mode” button till the “Heat” icon appears.
- Press the “
+
”o r “
- ”
button to select a desired room temperature. ( 1 6 - 3 1 )
-
Press the “Fan Speed” button to select wind speed.
5. Timer operation
Timer ON setting:
- When the air-conditioner is OFF, press the “Timer” button and select a desired ON time
through the temperature and time setting buttons.
-
“Preset ON Time” is displayed on the operation panel.
-
ON time can be regulated at any time in 0-24 hours.