Koolbreeze Climateasy 12NG, Руководство пользователя

Страница: 9 / 14

Page 9
SWING button: Press the "SWING" button to turn the
oscillation of the louvres on or off.
If the "WATER FULL" indicator lights, the condensate water
tank is full. The unit will stop and the E2 error code will
show . This should only happen very rarely, as most of the
water collected is evaporated and sent down the exhaust air
tube.
To empty the water, switch the unit off by pressing the ON/OFF
button, wait for three minutes, and then disconnect from the
mains supply. Place a drainage pan underneath the drain
outlet plug (an the bottom of the unit, at the back in the centre).
Withdraw the bung, and allow the water to drain into the
drainage pan. Replace the bung, and reconnect the unit to the
mains supply.
The water should be disposed of down a drain.
To avoid the need to empty the water, a permanent drain tube
may be fitted as shown: use a piece of 18mm diameter tube
(not supplied) and run the pipe to a drain, making sure that it
runs downhill all the way.
Unplug the CLIMATEASY 12NG from the mains when not in
use.