OPERATING INSTRUCTIONS Initial Product Cleaning Procedure
Like most appliances, your water dispenser requires periodic maintenance for maximum
efficiency and performance and must be cleaned on a regular basis (i.e. every 4 months).
To maintain a hygienic environment within your water dispenser and prevent potential
formation (growth) of bacteria, we strongly recommend regular cleaning.
1. Make sure the power cord is unplugged.
2. Mix 5 ounces of Hydrogen Peroxide into the cold tank. Let sit for 30 minutes keeping
cord unplugged.
3. Place a jug/container under the dispensing spigots and press both the hot and
cold dis-pensing buttons until the cleaning solution stops flowing. Discard cleaning
solution.
4. Using a jug/container, drain the remaining cleaning solution from the internal
reservoirs by unscrewing the drain cap and removing the drain plug from the drain
valve located at the back of the unit. Discard the cleaning solution.
5. Re-install the drain plug and drain cap on the unit and flush the system using 2L clean
water only (no cleaning solution) following the same basic steps outlined above. (See
step # 3) Place jug/container under drain valve and remove drain cap and drain plug
al-lowing rinse water to drain. When the rinse water stops flowing, re-install the drain
plug and drain cap and tighten. The cleaning process is now complete.
4
Kool Tek G8 Hot and Cold Water Cooler Manual