KOOFU BC-GLOSBE, Инструкция по эксплуатации

Страница: 20 / 24

Adjuster
"Adjuster" is the mechanism at the rear of the helmet to keep the helmet from moving.
Adjust the Adjuster so it will keep the helmet on your head securely.
Hold the front side of the
helmet and tighten the TRIFIT-2
Adjuster using the adjuster
dial.
Loosen and give each of the Adjuster some slack, put the helmet on your head, and adjust the Adjuster properly.
Open the Adjuster buckle as illustrated, adjust
the belt length while holding firmly the buckle,
and close the buckle tight.
2
Adjusting the Adjuster
How to Adjust the Leather Adjuster
(exclusive to BC-Oro)
Loosen Tighten
Turn the dial to the left Turn the dial to the right
How to Adjust the TRIFIT-2 Adjuster
(Standard for BC-Glosbe, Option for BC-Oro)
•Use the Adjuster dial for adjustment. Do not forcibly loosen/tighten the adjuster without using the dial.
It may break the mechanical system inside the dial.
•Be careful with your hair, especially long hair, so it does not get tangled in the TRIFIT-2 Adjuster.
Hold the front part and turn the dial.
About the Leather Adjuster
（BC-Oro）
The Leather Adjuster is designed for a
comfortable fitting, mostly available on the
ordinary caps and hats.
In case you prefer tighter fitting, please
use the TRIFIT-2 Adjuster, instead.
Holding firmly the buckle
Adjuster belt
Dial Dial
19
Open the Adjuster
buckle as illustrated
Adjuster belt
WARNING