Shenzhen Konvision Technology Co,.Ltd www.konvision.com
48
Dual picture operation:
Continuous press PIP / PBP button, you can quickly from single-picture and
dual-picture by the fast switch. In the dual picture, press the SWAP key, you can quickly
exchange the left and right pictures. In the dual picture, press the WIN SEL button, you
can select the picture window, at the same time, the selected window, you can also
adjust the parameters alone, does not affect the other picture.
Pixel Measurements Operating Instructions:
Under SDI1 signal only, press this key to execute the key operation: Pixel
measurement.
Pixel measurement: Press the MEASURE button, this time will enter the pixel
measurement function. Press LEFT, (RIGHT / VOLUME) or (UP / IMAGE ADJ), (DOWN /
WIN SEL) to move the large cross mark of the pixel measurement left / right / up and
down to measure the position of any one pixel R, G, B value.
Pixel measurement using two pixel contrast: Press the MEASURE button, then enter
the pixel measurement function. Press LEFT, (RIGHT / VOLUME) or (UP / IMAGE ADJ),
(DOWN / WIN SEL) to move the large cross to the first pixel, then press the LEFT button
and the (RIGHT / VOLUME) button , Mark the first pixel, then the pixel is marked with a
small cross center, then continue to press the LEFT, (RIGHT / VOLUME) or (UP / IMAGE
ADJ), (DOWN / WIN SEL) Will continue to move with a large cross mark, when the large
cross mark center to move to another pixel you need to contrast, you can compare the
difference between the current pixel and the previous marker pixel.
Measure:
Measure
Current: Current pixel
Ref-pos: Previous markup pixels
