4
1.
Technical Data
size
15x30x5.5 mm
weight
11 g
cables
3 pole receiver cable
5 pole sensor cable
2.
General
Please ensure to have installed the latest software
release on for your ESC and Futaba radio control. The
TelMe module functions as an interface between a
KONTRONIK ESC with a module port and a Futaba
receiver prepared for telemetry. The TelMe will be
detected automatically by the ESC and the data
transmission will be adjusted accordingly.
3.
Connecting the Module
The TelMe module is connected with the blue 5 pole
cable to one of the sensor ports of the ESC. The 3 pole
cable is connected to the receiver. Further connections
are not necessary.
After connecting the TelMe to the receiver, the
receiver and the radio control have to be
rebound. Please refer to the manual of your
radio control.
4.
Programming the Transmitter
During registration of your ESC in the sensor menu of
your radio control, the ESC must be switched on and
properly connected to your TelMe-module.
Additionally, the TelMe must be powered externally by
either a battery or the slave-port of the ESC by using a
Y-cable (not included). This is not necessary in regular
usage. After registration the ESC must be restarted and
the receiver and the radio control have to be rebound.
5.
Parameter
The following parameters will be displayed:
battery voltage [V]
used capacity [mAh]
RPM of the motor [U/min]
motor current [A]
amplifier temperature [°C]
BEC temperature [°C]
BEC current [A] (if available on this ESC)
PWM [%]
It is not possible to configure alarms through the TelMe,
but only through the Futaba radio control.
6.
Service, Technical Support, Hotline
Hotline
:
0800 BRUSHLESS
(+49(0)800 278745377)
free when calling from Germany
Tel
.:
+49 (0)7457 9435 0
Fax
:
+49 (0)7457 9435 90
:
Web
:
www.kontronik.com
Latest
KONTRONIK
+
SOBEK
Drives
product
information, FAQ, and support times are found on our
homepage.
7.
Recycling
Electronic components must not be
disposed with household waste but
have to be disposed according to legal
and environmental regulations. National
and local disposal regulations have to
be respected.
8.
Warranty
KONTRONIK + SOBEK Drives GmbH provides a 24
month warranty for this product from date of purchase
and purchase within the EU. Warranty for purchases
made outside the EU is in line with the respective legal
regulations. This warranty does not cover: suitability for
specific application, components worn by use,
application of reverse or improper voltage, tampering,
misuse or shipping. Our warranty liability is limited to
repairing or replacing the unit to our original
specifications. All warranty claims terminate with
opening of the product. Because we have no control
over the installation or use of these products, in no case
our liability exceeds the original cost of the product. For
personal injury or damages of things and their
consequences resulting from my delivery or work, I
cannot accept any liability as I have no control on the
usage and handling of my product. To accept
guarantee, the original bill on which the product, the
date of purchase and the dealer are named must be
sent together with the product. Also a detailed fault
description is necessary and should include: used
transmitter, used receiver, time of failure. Please use
the KONTRONIK repair form for sending in and also
add your address, telephone number and e-mail-
address.
By the act of using this module the user accepts all
resulting liability.
!
