7. Product Description
V Panel Express –User’s Guide (V1.01)
7.3.
Left and Right Side View
When powering on the V Panel Express, make sure that the air intake and exhaust openings are not
obstructed.
Fig. 13: V Panel Express (left side)
Fig. 14: V Panel Express (right side)
Legend for
and
1
Heat sink with VESA 75/100 mounting holes
2
Access door with knurled screw
3
Front panel with display
4
Air intake openings
5
Interface side (bottom)
6
Type label
7
Mounting slots with installed mounting clamp
and Allen Screw
8
Mounting clamp
At the left side is situated the expansion card access door (Fig. 13, pos. 2) secured with a knurled screw. When opening
this access door you have access to the free card slots of the raiser card installed onto the ETX baseboard. Install the
expansion cards as described in the section 8.1 “Installing/Removing the Expansion Cards”.
Note for mounting clamps:
The V Panel Express 121 system will be secured into an instrument panel or cabinet with only one
mounting clamp on the left and one on the right side as shown in (Fig. 13 and Fig. 14, pos 8).
The V Panel Express 150/170/190 system will be secured into an instrument panel or cabinet with two
mounting clamps on each side.
5
1
6
2
5
4
3
3
7
7
8
4
www.kontron.com
21
