RES2404-PTP-PoE User Guide. Rev. 1.0
www.kontron.com
// 10
1/
Introduction
The RES2404-PTP-PoE is a standalone Rugged Ethernet Switch (RES) family, supporting 24 Gigabit Ethernet Ports
and four 10 Gigabit Ethernet Ports. It is specifically designed for working reliably under harsh environmental
conditions.
There are two different RES2404-PTP-PoE product options (see table below), each using the Ethernet Switch Core
Module ESC2404-PTP.
Table 1: Product Variants
Product Name
Description
RES2404-AC-PTP-PoE
24x GbE ports, 4x 10GbE ports, PTP module, PoE+, 300 W power supply
RES2404-AC-PTP
24x GbE ports, 4x 10GbE ports, PTP module, no PoE+, 100 W power supply
Each switch interface is able to run at full wire speed regardless of the status of other interfaces. The switching fabric
does not limit the throughput of the interfaces. The product is defined as non-blocking switch fabric with line rate
switching. The number of interfaces and the corresponding speed define the maximum bandwidth. For 24 x GbE ports
+ 4 x 10GbE ports operating at full duplex rate, the resulting bandwidth is 64Gbit/sec (24Gbit/sec + 40Gbit/sec).
The key features of the Rugged Ethernet Switch are:
1U System
24 Ports 10/100/1000Base-T RJ45
four 10 Gigabit Ethernet Ports
Power Suppy AC 110/230 with 100 W without PoE or 300 W PoE version
10/100/1000Base-T and RS232 for switch management
Rotary Dip Switch for configuration of 8bit Carrier ID (CID)
Designed to meet military and transportation norms
Temperature range from -20°C to +50°C (RES2404-AC-PTP)
Temperature range from -20°C to +55°C (RES2404-AC-PTP-PoE)