RAK-100S-DNV - User Guide, Rev. 1.0
// 71
12.2.4.
Boot Setup Menu
The boot setup menu lists the for boot device priority order, that is generated dynamically.
Figure 36: BIOS Boot Setup Menu
BIOS SETUP UTILITY
Main
Advanced
Power
Boot
Security
Save & Exit
Boot Configuration
Full Screen LOGO Display
[Disabled]
Setup Prompt Timeout
1
Bootup NumLock State
[On]
CSM Support
[Disabled]
Boot Option Filter
[UEFI Only]
Load Built-in Shell*
[Enabled]
→
←
: Select Screen
File System Drivers
[Enabled]
↑
↓
: Select Item
Enter: Select
Boot Option Priorities
+/-: Change Opt.
Boot Option #1
[Windows Boot Manager (P5 .)] F1: General Help
Boot Option #2
[P4: WDC WD3200LPCPCX-..]
F2: Previous Values
Boot Option #3
[UEFI: Built-in EFI Shell]
F3: Optimized Defaults
F4: Save & Exit
Hard Drive BBS Priorities
ESC: Exit
Version 2.19.1266. Copyright (C) 2019, American Megatrends, Inc.
* These items appear only when selecting 'UEFI and Legacy' or 'UEFI only'.
Feature
Option
Description
Full Screen LOGO
Display
[Disabled], [Enabled]
Select whether to enable or disable to display logo screen.
Bootup NumLock
State
[On], [Off]
Select the state of the NumLock feature of the keyboard after
Startup.
[On]: The keys on the keypad will act as numeric keys.
[Off]: The keys on the keypad will act as cursor keys.
CSM Support
[Enabled]
Select whether to enable or disable CSM support.
Boot Option Filter
[UEFI and Legacy],
[Legacy only], [UEFI
only]
Control Legacy / UEFI ROMs priority.
Load Built-in Shell
[Enabled], [Disabled]
It controls installation of the boot option for a built-in shell
File System Drivers
[Enabled], [Disabled]
Free Software UEFI File System Drivers, such as a read-only
NTFS or exFAT EFI drivers, courtesy of the GRUB project.
Boot Option #1 / #2 /
#3
[UEFI: Built-in EFI
Shell], [P4: WDC
WD3200LPCX-
00VHAT0], [Windows
Boot Manager (P5:
Select Boot option.