Kontron MSM-LP, Руководство пользователя

Страница: 18 / 45

www.kontron.com
16
MSM-LP / MSM-LP Connectors & Jumpers
3.2.3 Serial Port Interfaces – X5/X11/X13/X15
Four serial ports for asynchronous serial communication are defined. By default, they all support TTL levels. An
external conversion to RS-232 and RS-422/485 is possible for all ports.
Note: A conversion to another voltage level (RS-232 or RS-422/485) is possible. The design must assure that a
placement option can bypass the level-shifters to meet the requirement that all ports support TTL levels.
Header Pin Signal Name Function DSUB9
1 DCDXx# Data carrier detect 1
2 DSRXx# Data set ready 6
3 RXDXx# Receive data 2
4 RTSXx# Request to send 7
5 TXDXx# Transmit data 3
6 CTSXx# Clear to send 8
7 DTRXx# Data terminal ready 4
8 RIXx# Ring indicator 9
9 GND Ground 5
2.54mm grid
10 V5.0_S0 Power +5V -
x is the number of the COM port (COM1: x -> 1)
3.2.4 GPIO and AD/DA Interface – X7
The board has a GPIO header interface with additional AD/DA channels. Any filtering must be done externally.
Header Pin Signal Name Function
1 GPIO0 General purpose I/O
2 GPIO1 General purpose I/O
3 GPIO2 General purpose I/O
4 GPIO3 General purpose I/O
5 GPIO4 General purpose I/O
6 GPIO5 General purpose I/O
7 GPIO6 General purpose I/O
8 GPIO7 General purpose I/O
9 PWM_OUT0 D/A output
10 PWM_OUT1 D/A output
11 ADC_IN0 A/D input
12 ADC_IN1 A/D input
13 ADC_IN2 A/D input
14 ADC_IN3 A/D input
15 GND Ground
2.00mm grid
16 +V3.3_S5 Power +3.3V