MS1300 Getting Started | VLAN-segregated Management and Payload Networks
www.symkloud.com
// 18
5/
Management Configuration
By completing the steps described in this section, you will set up the management IP address, i.e. the address required to
access the platform management features.
After completing this stage, you will be able to access the following interfaces:
1.
System Manager RESTFUL API interface
2.
System Manager web interface
3.
ShMC and BMC IPMI Over LAN (IOL) and Serial Over LAN (SOL) interfaces
These interfaces (or any combination thereof) can be used to manage the MS1300 platform, perform firmware upgrades,
monitor system health and configure the platform more in depth.
5.1.
Set Up Access to the ShMC
To access the ShMC CLI using the Ctrl+g 0 command:
1.
2.
Release both keys
3.
0
4.
Press the Enter key and release it
Hint: It is preferable to use the Ctrl key located on the left of the keyboard.
Log in the ShMC CLI using the default credentials user: admin and password: admin.
Command
Purpose
Ctrl+g 0
MSH8900 Login:
admin
Password:
admin
ipmitool>
Use HOTKEY to redirect serial console
multiplexer to the ShMC CLI.
The ipmitool> prompt means the ShMC was
reached.
Unboxing the
platform
Initial system
connections
Switch
configuration
Management
configuration
Payload
access
OS
installation
Performance
assessment
