Kontron MOPSlcdLX, Руководство пользователя

Страница: 23 / 54

KTD-S0005-0 Page 19 Parallel Port Interface
MOPSlcdLX
User's Guide
10 Parallel Port Interface
The MOPSlcdLX incorporates a parallel port that can be set to uni-/bidirectional and supports EPP operating
modes.
10.1 Connector
The parallel port is available through the X15004 connector (26 pins). To have the signals available on a
standard parallel interface connector DSUB25 an adapter cable is required which is offered by KONTRON
(KAB-DSUB25-1, part number 96015-0000-00-0).
Header Pin Signal Name Function DSUB25
1
/STB
Strobe 1
2 /AFD Autofeed 14
3
D0
Data 0 2
4 /ERR Error 15
5
D1
Data 1 3
6 /INIT Init 16
7
D2
Data 2 4
8 /SLIN Select in 17
9
D3
Data 3 5
10 GND Ground 18
11
D4
Data 4 6
12 GND Ground 19
13
D5
Data 5 7
14 GND Ground 20
15
D6
Data 6 8
16 GND Ground 21
17
D7
Data 7 9
18 GND Ground 22
19
/ACK
Acknowledge 10
20 GND Ground 23
21
/BUSY
Busy 11
22
GND
Ground 24
23
PE
Paper out 12
24
GND
Ground 25
25
/SLCT
Select out 13
26 VCC
1)
Power +5V ---
Note:
1)
To protect the external power lines of peripheral device make sure that
- the wires have the right diameter to withstand the maximum available current.
- to enclosure of the peripheral device fulfills the fire-protecting conditions of IEC/EN 60950.